Attributes

Clean room classification	ISO class 7
Delivery information	Assembled. Motor included separately.
Dry room	<lt/>1
ESD	Yes
Length max [l max]	5000mm
Length min [L min]	250mm
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min
Preferred values	80120160
Recommended accessories	Connection kit,Leg set SZ 1
Reversible operation [RV]	zulässig
Section load in accumulation operation	30kg
Track width in direction of transport [b max]	720mm
Track width in direction of transport [b min]	80mm
Weight	0kg

• Ready for operation conveyor section with own drive. Motor mounting right (MA = R), left (MA = L), with track width b = 160 mm also central (MA = M)
• Section loads up to 30 kg in accumulation operation
• Conveyor medium: Toothed belt with mesh top, suitable for use in an EPA
• Depending on the length, the BS 1 is delivered with two, three or four cross connectors
• Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
• Special models on request
• 1 - Ready for operation conveyor section with own drive. Motor mounting right (MA = R), left (MA = L), with track width b = 160 mm also central (MA = M)
• 2 - Section loads up to 30 kg in accumulation operation
• 3 - Conveyor medium: Toothed belt with mesh top, suitable for use in an EPA
• 4 - Depending on the length, the BS 1 is delivered with two, three or four cross connectors
• 5 - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
• 6 - Special models on request

Belt section for longitudinal conveying of workpiece pallets.
Longitudinal conveying of workpiece pallet on conveyor sections of up to 5000 mm. In connection with two lift transverse units, the BS 1 can be used as a transverse conveyor.
Ready for operation conveyor section with own drive. Motor mounting right (MA = R), left (MA = L), with track width b = 160 mm also central (MA = M), Section loads up to 30 kg in accumulation operation, Conveyor medium: Toothed belt with mesh top, suitabl

• 3D CAD
• Data Sheet

When using the belt section as a transverse conveyor between two main sections, a connection kit must be ordered separately.

Optional accessories:

Connection kit Leg set SZ 1

Connection Kit, Stop Rail

Connection Kit, Stop Rail

Assembly instructions

CAD data

Leg Sets

Leg Sets

Extruded aluminum profile Height-adjustable bases Suitable for conveyor sections and belt sections

Assembly instructions

CAD data

Condition on delivery:

Assembled. Motor included separately.

Belt Section BS 1

Number of cross connectors plastic AQV

l	AQV
(mm)
≤ 899	0
900 – 1399	1
≥ 1400	2

Longitudinal conveying of the workpiece pallet on segmented conveyor sections of up to 5000 mm

Transverse conveying of the workpiece pallet between parallel conveyor sections (in conjunction with two lift transverse units HQ 1/U)

Energy efficiency – Rexroth 4EE

No.			3842999898
Max. section load in accumulation operation		kg	30
ESD			yes
Cleanroom class			ISO class 7
Dry room	r.F.	%	<1
Reversible operation			permitted