Attributes

Combination options bQ x bL	BG 1:<LineBreak/>160 x 160; 240;320<LineBreak/>240 x 160; 240; 320; 400<LineBreak/>320 x 160; 240; 320; 400<LineBreak/>400 x 240; 320; 400<LineBreak/>480 x 320,BG 2:<LineBreak/>400 x 480<LineBreak/>480 x 400; 480<LineBreak/>640 x 400; 480<LineBreak/>800 x 400; 480
Conveyor medium	Toothed belt (suitable for use in an EPA)
Delivery information	Pre-assembled in modular units
ESD	yes
Length max [L max]	6000mm
Length min [L min]	320mm
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min
Pneumatic straight connection [Ø]	6mm
Preferred values	1.6024032040048E+20
Recommended accessories	Damper DA 2/60 for the outfeeding of workpiece pallets at v<sub>N</sub> <gt/> 9 m/min,Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets
Required accessories	1x M12x1 sensor with rated sensing range S for each (top/bottom) position inquiry<sub>N</sub> = 4 mm
Reversible operation [RV]	Reversierbetrieb möglich
Scope of delivery	Incl. fastening material,2x HQ 2/O,1x belt section in tandem design BS 2/T,2x connection kit,2x housing element SK 2/B,Assembly kit for electrical position inquiry,Pneumatic equipment for two or three positions
Section load in accumulation operation	60kg
Weight	0kg
Workpiece pallet weight [mG]	30kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Pre-assembled module for connecting two parallel longitudinal sections
• In tandem design with driven belt section for greater distances from 320 mm
• Size 2 from ≥ 480 x 480 mm onwards with two lifting cylinders per lift transverse unit
• Conveyor medium: Toothed belt (suitable for use in an EPA)
• Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• Can be combined with WT 2, WT 2/E, WT 2/F and WT 2/LS (only with version LS)
• Reversible operation possible
• Accumulation operation not permitted on the lift transverse units
• 1 - Pre-assembled module for connecting two parallel longitudinal sections
• 2 - In tandem design with driven belt section for greater distances from 320 mm
• 3 - Size 2 from ≥ 480 x 480 mm onwards with two lifting cylinders per lift transverse unit
• 4 - Conveyor medium: Toothed belt (suitable for use in an EPA)
• 5 - Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
• 6 - Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• 7 - Can be combined with WT 2, WT 2/E, WT 2/F and WT 2/LS (only with version LS)
• 8 - Reversible operation possible
• 9 - Accumulation operation not permitted on the lift transverse units

EQ 2/T Electrical Transverse Conveyor
Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions, Conveyor medium: Toothed belt (suitable for use in an EPA), Reversible operation possible, Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST

• 3D CAD
• Data Sheet

Recommended accessories

Damper DA 2/60 for the outfeeding of workpiece pallets at vN > 9 m/min

Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets

M12 sensor with M12x1 push-in fitting

M12 sensor with M12x1 push-in fitting

CAD data

M12 sensor with M8x1 push-in fitting

M12 sensor with M8x1 push-in fitting

CAD data

EQ 2/T Electrical Transverse Conveyor

L Transport direction of longitudinal conveyor

Q Transport direction of transverse conveyor

1 HQ 2/O lift transverse unit

2 Tandem design belt section BS 2/T

3 Connection kit

4 Housing element

Energy efficiency – Rexroth 4EE

Circuit diagram for unit with pneumatic equipment for two positions PN = 2, BG 1

1)	Not included in the scope of delivery

Circuit diagram for unit with pneumatic equipment for three positions PN = 3, BG 1

1)	Not included in the scope of delivery

Circuit diagram for unit with pneumatic equipment for two positions PN = 2, BG 2

1)	Not included in the scope of delivery

Circuit diagram for unit with pneumatic equipment for three positions PN = 3, BG 2

1)	Not included in the scope of delivery

Pneumatic equipment

PN = 2	PN = 3

No.			3842999895
Max. section load in accumulation operation		kg	60
ESD			yes
Reversible operation			Reversible operation possible
Size	BG		BG 1; BG 2
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	6
Length	l	mm	320 … 6,000

Compressed air consumption of TS 2plus units

Motor connection

Transport and nominal speed vN

Motor data