Attributes

Combination options bQ x bL	BG 1,160 x 160; 240; 320,240 x 160; 240; 320; 400,320 x 160; 240; 320; 400,400 x 240; 320; 400,480 x 320,BG 2,400 x 480,480 x 400; 480,640 x 400; 480,800 x 400; 480
Conveyor medium	Toothed belt (suitable for use in an EPA)
Delivery information	Pre-assembled in modular units,Protective housing, not assembled
ESD	yes
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	0 m/min ohne Motor und ohne Getriebe,6 m/min,12 m/min,15 m/min,18 m/min
Notice	Pneumatic equipment PN = 2: Upper and middle lift position,Pneumatic equipment PN = 3: Upper, middle and lower lift position
Pneumatic straight connection [Ø]	6mm
Preferred values	1.6024032040048E+20
Recommended accessories	Damper DA 2/60 for the outfeeding of workpiece pallets at v<sub>N</sub> <gt/> 9 m/min,Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets
Required accessories	1x M12x1 sensor with rated sensing range S for each position inquiry<sub>N</sub> = 4 mm
Reversible operation [RV]	Reversierbetrieb möglich
Scope of delivery	Incl. fastening material,Pneumatic equipment for two or three positions,Assembly kit for electrical position inquiry,Protective housing
Weight	0kg
Workpiece pallet weight [mG]	30kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Lift transverse unit for feeding out from a longitudinal section into a transverse section and vice versa
• Low height with motor mounted on side. It is therefore suitable for the operation of double-deck conveyor sections
• In two sizes with one or two lifting cylinders
• Conveyor medium: Toothed belt (suitable for use in an EPA)
• Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• Can be combined with WT 2/E, WT 2 and WT 2/F
• Vertical movement is delivered by pneumatic cylinders. There are two sizes available for total weights (workpiece pallet + load) of up to 30 kg: Size 1 (BG 1) with 1 pneumatic cylinder. Size 2 (BG 2) with 2 pneumatic cylinders for workpiece pallet dimensions from 400 x 480 mm
• 1 - Lift transverse unit for feeding out from a longitudinal section into a transverse section and vice versa
• 2 - Low height with motor mounted on side. It is therefore suitable for the operation of double-deck conveyor sections
• 3 - In two sizes with one or two lifting cylinders
• 4 - Conveyor medium: Toothed belt (suitable for use in an EPA)
• 5 - Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
• 6 - Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• 7 - Can be combined with WT 2/E, WT 2 and WT 2/F
• 8 - Vertical movement is delivered by pneumatic cylinders. There are two sizes available for total weights (workpiece pallet + load) of up to 30 kg: Size 1 (BG 1) with 1 pneumatic cylinder. Size 2 (BG 2) with 2 pneumatic cylinders for workpiece pallet dimensions from 400 x 480 mm

Lift Transverse Unit HQ 2/S
Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions, Conveyor medium: Toothed belt (suitable for use in an EPA), Can be combined with WT 2/E, WT 2 and WT 2/F, Suitable for mounting on an ST 2/… section with a profile width of

• 3D CAD
• Data Sheet

Required accessories

1x M12x1 sensor with rated sensing range S for each position inquiryN = 4 mm

Recommended accessories

Damper DA 2/60 for the outfeeding of workpiece pallets at vN > 9 m/min

Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets

M12 sensor with M12x1 push-in fitting

M12 sensor with M12x1 push-in fitting

CAD data

M12 sensor with M8x1 push-in fitting

M12 sensor with M8x1 push-in fitting

CAD data

Condition of Delivery

Pre-assembled in modular units

Protective housing, not assembled

Scope of delivery

Incl. fastening material

Pneumatic equipment for two or three positions

Assembly kit for electrical position inquiry

Protective housing

Lift Transverse Unit HQ 2/S

L Transport direction of longitudinal section

Q Transport direction of transverse section

1 Q 2/S lift transverse unit

2 Drive motor

3 Connection kit

4 Motor mounting kit

5 Housing element

*) 180 mm with profile height of 80 mm, 200 mm with profile height of 100 mm

Energy efficiency – Rexroth 4EE

Circuit diagram for unit with pneumatic equipment for two positions PN = 2, BG 1

1)	Not included in the scope of delivery

Circuit diagram for unit with pneumatic equipment for three positions PN = 3, BG 1

1)	Not included in the scope of delivery

Circuit diagram for unit with pneumatic equipment for two positions PN = 2, BG 2

1)	Not included in the scope of delivery

Circuit diagram for unit with pneumatic equipment for three positions PN = 3, BG 2

1)	Not included in the scope of delivery

Pneumatic equipment

PN = 2	PN = 3

No.			3842999888
ESD			yes
Reversible operation			Reversible operation possible
Size	BG		BG 1; BG 2
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	6

Compressed air consumption of TS 2plus units

Motor connection

Transport and nominal speed vN

Motor data