Attributes

Combination options bQ x bL	BG 1: 160 x 160; 240; 320 240 x 160; 240; 320; 400 320 x 160; 240; 320; 400 400 x 240; 320; 400 480 x 320,BG 2: 400 x 480 480 x 400; 480 640 x 400; 480 800 x 400; 480
Conveyor medium	Toothed belt (suitable for use in an EPA)
Delivery information	Pre-assembled in modular units
ESD	Yes
Length max [L max]	6000mm
Length min [L min]	320mm
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min
Pneumatic straight connection [Ø]	6mm
Preferred values	1.6024032040048E+20
Recommended accessories	Damper DA 2/60 for outfeeding workpiece pallets at v<sub>N</sub> <gt/> 9 m/min,Rockers WI 2/…, WI/M and DA 2/60, DA 2/100-C for BG 2 for infeeding the workpiece pallets
Required accessories	1x sensor M12x1 with rated switching distance S<sub>N</sub> = 4 mm for each position sensor (top/bottom)
Scope of delivery	Incl. fastening material,2x HQ 2/O,1x tandem design belt section BS 2/T,2x connection kit,2x protective case SK 2/B,Assembly kit for electrical position sensor,Pneumatic equipment for 2 or 3 positions
Section load in accumulation operation	60kg
Weight	0kg
Workpiece pallet weight [mG]	30kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Pre-assembled module for connecting two parallel longitudinal sections
• In tandem design with driven belt section for greater distances from 320 mm
• Size 2 from ≥ 480 x 480 mm onwards with two lifting cylinders per lift transverse unit
• Conveyor medium: Toothed belt (suitable for use in an EPA)
• Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• Can be combined with WT 2, WT 2/E, WT 2/F and WT 2/LS (only with version LS)
• Reversible operation possible
• Accumulation operation not permitted on the lift transverse units
• 1 - Pre-assembled module for connecting two parallel longitudinal sections
• 2 - In tandem design with driven belt section for greater distances from 320 mm
• 3 - Size 2 from ≥ 480 x 480 mm onwards with two lifting cylinders per lift transverse unit
• 4 - Conveyor medium: Toothed belt (suitable for use in an EPA)
• 5 - Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
• 6 - Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• 7 - Can be combined with WT 2, WT 2/E, WT 2/F and WT 2/LS (only with version LS)
• 8 - Reversible operation possible
• 9 - Accumulation operation not permitted on the lift transverse units

Electrical transverse conveyor EQ 2/T LS
Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions, Conveyor medium: Toothed belt (suitable for use in an EPA), Reversible operation possible, Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST

• Data Sheet