Attributes

Productgroup ID	2
Workpiece pallet total weight [mG]	30kg
ESD	yes
Pneumatic straight connection [Ø]	6mm
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar
Weight	0kg
Notice	Pneumatic equipment PN = 2: Upper and middle lift position,Pneumatic equipment PN = 3: Upper, middle and lower lift position
Scope of delivery	Incl. fastening material,Pneumatic equipment for two or three positions,Assembly kit for electrical position inquiry,Incl. drive kit (required to drive an HQ 2/T)
Delivery information	Fully assembled
Recommended accessories	Damper DA 2/60 for the outfeeding of workpiece pallets at v<sub>N</sub> > 9 m/min,Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets
Required accessories	1x M12x1 sensor with rated sensing range S for each position inquiry<sub>N</sub> = 4 mm,Housing Element SK 2
Preferred values	160,240,320,400,480,640,800

• Lift transverse unit without own drive for feeding out from a longitudinal section into a transverse section with a roller section and vice versa
• Used together with the HQ 2/O as a tandem design
• Driven by toothed belt coupling
• Suitable for use in special designs
• In two sizes with one or two lifting cylinders
• Conveyor medium: Toothed belt (suitable for use in an EPA)
• Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• n.a.
• Reversible operation possible
• - n.a.

Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions, Conveyor medium: Toothed belt (suitable for use in an EPA), Reversible operation possible, Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST

• Data Sheet