LIFT POSITIONING UNIT HP 2/LS
| Delivery information | Assembled |
| ESD | Yes |
| Length in direction of transport [lT] | 1.6024032040048E+20 |
| Notice | Throttle check valve, exhaust air with push-in fitting, diameter ⌀ 6 mm, for thread G 3/8" must be attached by the customer,Permissible vertical process forces incl. WT 2,If the value is "0" at length in direction of transport [lT], HP 2 will be delivered with a lifting plate 3842516048 instead of the lift positioning plate for self-construction of the positioning plate |
| Permissible vertical process force | 1100N |
| Pneumatic straight connection [Ø] | 6mm |
| Preferred values | 160240320400480 |
| Recommended accessories | Throttle kit (3842211355) to lower the WT gently onto the conveyor medium,Protective case HP 2 |
| Repetition accuracy | ±0,05 |
| Required accessories | Stop gate VE 2/...,Throttle check valve, exhaust air, G3/8", diameter Ø 6 mm,Sensor |
| Scope of delivery | Incl. fastening material,Switch bracket for the assembly of M12 sensors for top and bottom lift position sensing |
| Weight | 0kg |
| Workpiece pallet weight [mG] | 110kg |
| required compressed air connection [pmax] | 6bar |
| required compressed air connection [pmin] | 4bar |
- Positioning of a workpiece pallet in a processing station with high repetition accuracy requirements and higher workpiece pallet weights.
- Positioning using the positioning pins of the HP 2 and positioning bushings of the WT 2 workpiece pallet
- Lifting cylinder with adjustable damping of the upper and lower end positions
- Upper end damping takes effect only under full lift
- Infinitely adjustable lift height in 8 lift ranges hN from 0 ... 404 mm
- Can be combined with WT 2, WT 2/E, WT 2/F and WT 2/LS (only with version LS)
- Installation location AO = UB: Installation location under the conveyor section
- Installation location AO = AT: Installation location on the machine plate
- Installation location AO = O: Installation location for self-construction
- 1 - Positioning of a workpiece pallet in a processing station with high repetition accuracy requirements and higher workpiece pallet weights.
- 2 - Positioning using the positioning pins of the HP 2 and positioning bushings of the WT 2 workpiece pallet
- 3 - Lifting cylinder with adjustable damping of the upper and lower end positions
- 4 - Upper end damping takes effect only under full lift
- 5 - Infinitely adjustable lift height in 8 lift ranges hN from 0 ... 404 mm
- 6 - Can be combined with WT 2, WT 2/E, WT 2/F and WT 2/LS (only with version LS)
- 7 - Installation location AO = UB: Installation location under the conveyor section
- 8 - Installation location AO = AT: Installation location on the machine plate
- 9 - Installation location AO = O: Installation location for self-construction
Lift positioning unit HP 2 LS
, , Positioning using the positioning pins of the HP 2 and positioning bushings of the WT 2 workpiece pallet, Lifting cylinder with adjustable damping of the upper and lower end positions, Upper end damping takes effect only under full lift, Infinitely ad
, , Positioning using the positioning pins of the HP 2 and positioning bushings of the WT 2 workpiece pallet, Lifting cylinder with adjustable damping of the upper and lower end positions, Upper end damping takes effect only under full lift, Infinitely ad
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.