Attributes
| Delivery information |
Assembled |
| ESD |
Yes |
| Length in direction of transport [lT] |
160,240,320 |
| Lift arrangement [HA] |
0; 1 |
| Notice |
Repetition accuracy applies only to lifts of up to 204 mm,Permissible vertical process forces incl. WT 2,HA = 1 only for b = 240 mm |
| Permissible vertical process force |
400N |
| Pneumatic straight connection [Ø] |
8mm |
| Preferred values |
160,240,320 |
| Repetition accuracy |
±0,05 |
| Required accessories |
Position sensor set SA cylinder,Position sensor set with turret stop RA,Protective case HP 2/L |
| required compressed air connection [pmax] |
6bar |
| required compressed air connection [pmin] |
4bar |
| Scope of delivery |
Incl. fastening material,Incl. throttle check valve |
| Weight |
0kg |
| Workpiece pallet weight [mG] |
40kg |
- Positioning of a workpiece pallet in a processing station with high repetition accuracy requirements
- Positioning with exchangeable positioning pins in the HP 2/L and positioning bushings in the WT 2 workpiece pallet
- Lifting cylinder of Ø 40 mm with damping for the lower and upper end positions
- Exchange of lifting cylinder possible without disassembling the lift plate
- 5 stroke ranges h0 of 0 ... 240 mm are infinitely adjustable within the lift range
- Optional lifting cylinder for b = 240 mm, centrally (HA = 0) or offset (HA = 1). Space-saving configuration made possible by inner WT stop
- Adjustment time where H = 50 mm without load in each case: Upward stroke = 0.5 s, downward stroke = 0.5 s (= lift range from 0 to 28 mm)
- Can be combined with WT 2, WT 2/E, WT 2/F and WT 2/LS (only with version LS)
- Installation location AO = UB: Installation location under the conveyor section
- Installation location AO = AT: Installation location on the machine plate
- Installation location AO = O: Installation location for self-construction
- - Positioning of a workpiece pallet in a processing station with high repetition accuracy requirements
- - Positioning with exchangeable positioning pins in the HP 2/L and positioning bushings in the WT 2 workpiece pallet
- - Lifting cylinder of Ø 40 mm with damping for the lower and upper end positions
- - Exchange of lifting cylinder possible without disassembling the lift plate
- - 5 stroke ranges h0 of 0 ... 240 mm are infinitely adjustable within the lift range
- - Optional lifting cylinder for b = 240 mm, centrally (HA = 0) or offset (HA = 1). Space-saving configuration made possible by inner WT stop
- - Adjustment time where H = 50 mm without load in each case: Upward stroke = 0.5 s, downward stroke = 0.5 s (= lift range from 0 to 28 mm)
- - Can be combined with WT 2, WT 2/E, WT 2/F and WT 2/LS (only with version LS)
- - Installation location AO = UB: Installation location under the conveyor section
- - Installation location AO = AT: Installation location on the machine plate
- - Installation location AO = O: Installation location for self-construction
Lift positioning unit HP 2/L LS
Positioning of a workpiece pallet in a processing station with high repetition accuracy requirements, Positioning with exchangeable positioning pins in the HP 2/L and positioning bushings in the WT 2 workpiece pallet, Lifting cylinder of Ø 40 mm with damping for the lower and upper end positions, Exchange of lifting cylinder possible without disassembling the lift plate, 5 stroke ranges h0 of 0 ... 240 mm are infinitely adjustable within the lift range, Optional lifting cylinder for b = 240 mm, centrally (HA = 0) or offset (HA = 1). Space saving configuration made possible by inner WT stop, Adjustment time where H = 50 mm without load in each case: Upward stroke = 0.5 s, downward stroke = 0.5 s (= lift range from 0 to 28 mm), Can be combined with WT 2, WT 2/E, WT 2/F and WT 2/LS (only with version LS), Installation location AO = UB: Installation location under the conveyor section, Installation location AO = AT: Installation location on the machine plate, Installation location AO = O: Installation location for self construction