Attributes

Clean room classification	ISO class 7
Conveyor medium	Duplex chain (suitable for use in an EPA)
Delivery information	Fully assembled
Dry room	<lt/>1
ESD	Yes
Length max [L max]	2000mm
Length min [L min]	385mm
Material information	Section profile: Aluminum, natural; anodized,Guide profile: Stainless steel,Glide profile: PE
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min
Notice	Individual width variants can be ordered,Chain suitable for use in an EPA
Operating temperature [T] max	+40 °C
Preferred values	1.6024032040048E+28
Recommended accessories	Connection Kits,Section supports SZ 2/...,LU 2 Automatic Lubrication Unit
Track width in direction of transport [b max]	1200mm
Track width in direction of transport [b min]	160mm
Weight	0kg
Workpiece pallet weight [mG]	250kg

• Particularly robust, functional conveyor section, complete with drive
• Longitudinal conveying of the workpiece pallet on conveyor sections of up to 2000 mm
• Transverse conveying between parallel conveyor sections
• Can also be used in longitudinal conveyors
• Recommended for use with two HQ 2/G-H lift transverse units
• Conveyor medium: Duplex chain (suitable for use in an EPA)
• Motor mounting on right, left or centrally (centrally on track widths of 240 mm and above)
• Motor connection: optionally with cable/plug or terminal box motor connection
• Integrated chain tensioner; to be adjusted manually
• Special models on request
• We strongly advise using the LU 2 automatic lubrication unit
• Accumulation operation not permitted
• Reversible operation possible
• Only workpiece pallets with PE wear pad are permitted
• 1 - Particularly robust, functional conveyor section, complete with drive
• 2 - Longitudinal conveying of the workpiece pallet on conveyor sections of up to 2000 mm
• 3 - Transverse conveying between parallel conveyor sections
• 4 - Can also be used in longitudinal conveyors
• 5 - Recommended for use with two HQ 2/G-H lift transverse units
• 6 - Conveyor medium: Duplex chain (suitable for use in an EPA)
• 7 - Motor mounting on right, left or centrally (centrally on track widths of 240 mm and above)
• 8 - Motor connection: optionally with cable/plug or terminal box motor connection
• 9 - Integrated chain tensioner; to be adjusted manually
• 10 - Special models on request
• 11 - We strongly advise using the LU 2 automatic lubrication unit
• 12 - Accumulation operation not permitted
• 13 - Reversible operation possible
• 14 - Only workpiece pallets with PE wear pad are permitted

BS 2/G-250 belt section
Accumulation operation not permitted, Special models on request, Reversible operation possible, Motor connection: optionally with cable/plug or terminal box motor connection, Motor mounting on right, left or centrally (centrally on track widths of 240 mm

• 3D CAD
• Data Sheet

Recommended accessories

Connection Kits

Section supports SZ 2/...

LU 2 Automatic Lubrication Unit

Condition of Delivery

Fully assembled

The belt section is a functional conveyor line with its own drive for the transverse transport of the workpiece pallet between parallel conveyor lines in conjunction with two HQ 2/... lift transverse units or for longitudinal transport on conveyor lines up to 2000 mm.

No.			3842999022
Max. section load in accumulation operation		kg	250
ESD 1)			yes
Cleanroom class			ISO class 7
Dry room	r.F.	%	<1
Max. operating temperature	T	°C	+40
Material entry			Section profile: Aluminum, natural; anodized Guide profile: stainless steel Glide profile: PE
Length	l	mm	385 … 2,000

1)	Chain suitable for use in an EPA