Attributes

Combination options bQ x bL	800 … 1200 x 800 ... 1200
Delivery information	Fully assembled,Kits for lateral guides included
ESD	yes
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min
Notice	Individual width variants available for track width in longitudinal conveyor,Individual width variants available for track width in transverse conveyor
Pneumatic straight connection [Ø]	8mm
Preferred values	48064080010401200
Recommended accessories	Dampers DA 2/100-E, DA 2/150-E or a fixed stop (included in the scope of delivery) can be used for outfeeding the WT 2, WT 2/F, WT 2/H and 2/F-H workpiece pallets. Damper DA 2/100-C can be used at the belt end for outfeeding a WT 2 or WT 2/F workpiece pallet.,Dampers DA 2/100-H or DA 2/250-H for outfeeding of the workpiece pallets WT 2/H and WT 2/F-H,A fixed stop (included in the scope of delivery) or the DA 2/100-C damper can be used for infeeding the WT 2 and WT 2/F workpiece pallet. This is also possible in combination with rocker WI 2, WI 2/X, WI 2/D, WI 2/M.,The DA 2/100-H and DA 2/250-H dampers can be used for infeeding the WT 2/H and WT 2/F-H workpiece pallets.
Required accessories	M12x1 sensor for position inquiry,Dampers for outfeeding and infeeding workpiece pallets
Reversible operation [RV]	Reversierbetrieb möglich
Scope of delivery	Incl. fastening material,Switch holder for 12 mm sensor for position inquiry,Assembly kit for electrical position inquiry,Lateral guide kit for b<sub>l</sub> ≤ 640 mm or for b<sub>l </sub><gt/> 640 mm
Track width in the longitudinal conveyor [bL max]	1200mm
Track width in the longitudinal conveyor min [bL min]	640mm
Track width in the transverse conveyor max [bQ max]	1200mm
Track width in the transverse conveyor min [bQ min]	480mm
Weight	0kg
Workpiece pallet weight [mG]	240kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Lift transverse unit for feeding out of a from longitudinal section into a transverse section and vice versa
• Use for high total weights up to 2 kg/cm on the smallest side of the workpiece pallet and up to 240 kg
• Flat construction permits system layouts on several levels
• Synchronized lifting movement of the four block cylinders for uniform and parallel lifting movement
• Conveyor Medium Flat Top Chain
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F-H
• Depending on the installation, height-adjustable lateral guides can be used as a fixed stop for exporting or as a lateral guide when changing workpiece pallets
• Fixed stops in the form of adjustable/movable lateral guides made of strip steel
• Reversible operation possible
• Accumulation operation not permitted
• 1 - Lift transverse unit for feeding out of a from longitudinal section into a transverse section and vice versa
• 2 - Use for high total weights up to 2 kg/cm on the smallest side of the workpiece pallet and up to 240 kg
• 3 - Flat construction permits system layouts on several levels
• 4 - Synchronized lifting movement of the four block cylinders for uniform and parallel lifting movement
• 5 - Conveyor Medium Flat Top Chain
• 6 - Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• 7 - Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F-H
• 8 - Depending on the installation, height-adjustable lateral guides can be used as a fixed stop for exporting or as a lateral guide when changing workpiece pallets
• 9 - Fixed stops in the form of adjustable/movable lateral guides made of strip steel
• 10 - Reversible operation possible
• 11 - Accumulation operation not permitted

HQ 2/C-H Lift Transverse Unit
Accumulation operation not permitted, Reversible operation possible, Conveyor Medium Flat Top Chain, Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F H, Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/… H section wi

• 3D CAD
• Data Sheet

Required accessories

M12x1 sensor for position inquiry

Dampers for outfeeding and infeeding workpiece pallets

Recommended accessories

Dampers DA 2/100-E, DA 2/150-E or a fixed stop (included in the scope of delivery) can be used for outfeeding the WT 2, WT 2/F, WT 2/H and  2/F-H workpiece pallets. Damper DA 2/100-C can be used at the belt end for outfeeding a WT 2 or WT 2/F workpiece pallet.

Dampers DA 2/100-H or DA 2/250-H for outfeeding of the workpiece pallets WT 2/H and WT 2/F-H

A fixed stop (included in the scope of delivery) or the DA 2/100-C damper can be used for infeeding the WT 2 and WT 2/F workpiece pallet. This is also possible in combination with rocker WI 2, WI 2/X, WI 2/D, WI 2/M.

The DA 2/100-H and DA 2/250-H dampers can be used for infeeding the WT 2/H and WT 2/F-H workpiece pallets.

Condition of Delivery

Fully assembled

Kits for lateral guides included

Scope of delivery

Incl. fastening material

Switch holder for 12 mm sensor for position inquiry

Assembly kit for electrical position inquiry

Lateral guide kit for bl ≤ 640 mm or for bl > 640 mm

HQ 2/C-H Lift Transverse Unit

Energy efficiency – Rexroth 4EE

Circuit diagram

1)	Not included in the scope of delivery

No.			3842999002
Max. total weight of workpiece pallet	mG	kg	240
ESD			yes
Reversible operation			Reversible operation possible
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	8

Compressed air consumption of TS 2plus units

Motor connection

Transport and nominal speed vN

Motor data