Attributes
| Cycle Time |
5s |
| Delivery information |
Not assembled |
| ESD |
Yes |
| Material information |
Housing: Aluminum, hard anodized,Stop: Steel, hardened |
| Min. workpiece pallet weight m |
50 kg |
| Nominal speed [vN] |
6 m/min,9 m/min,12 m/min,15 m/min,18 m/min |
| Notice |
1 = ST 5/OC; AS 5/OC; PE 5/OC; PE 5/OC-T<br/>2 = PE 5/OC & PE 5/OC-T (455x455)<br/>3 = PE 5/OC(b=455, l<sub>WT</sub>=650)<br/>4 = PE 5/OC-T (bL=455, bQ=650) |
| Operating temperature [T] max |
+5 ... +60 °C |
| Required accessories |
Actuator and sensor system cables common in the market (5-pole) |
| Track width in direction of transport [b max] |
1500mm |
| Track width in direction of transport [b min] |
400mm |
| Weight |
0kg |
| Workpiece pallet weight [mG] |
1000kg |
- Please note that in the limit ranges of the permissible weight/speed combinations, the damping behavior may not be optimal.
- Damped stopping of a workpiece pallet at the defined stop surface and for separating workpiece pallets
- Electrical stop gate for the set-up of plants without pneumatic system
- Can be combined with WT 5
- Little installation work as there is no pneumatic system
- Low noise development
- Loading only in the direction of transport
- No spring return, the stop blade of the stop gate is reset or put up by means of a step motor
- Hydraulic damping, not adjustable
- Transportation Control
- Installation location AO = 1: ST 5/OC; AS 5/OC; PE 5/OC; PE 5/OC-T
- Installation location AO = 2: PE 5/OC; PE 5/OC-T (b = 455; lT = 455)
- Installation location AO = 3: PE 5/OC (b = 455; lT = 650)
- Installation location AO = 4: PE 5/OC-T (lT = 455; b = 650)
- - Please note that in the limit ranges of the permissible weight/speed combinations, the damping behavior may not be optimal.
- - Damped stopping of a workpiece pallet at the defined stop surface and for separating workpiece pallets
- - Electrical stop gate for the set-up of plants without pneumatic system
- - Can be combined with WT 5
- - Little installation work as there is no pneumatic system
- - Low noise development
- - Loading only in the direction of transport
- - No spring return, the stop blade of the stop gate is reset or put up by means of a step motor
- - Hydraulic damping, not adjustable
- - Transportation Control
- - Installation location AO = 1: ST 5/OC; AS 5/OC; PE 5/OC; PE 5/OC-T
- - Installation location AO = 2: PE 5/OC; PE 5/OC-T (b = 455; lT = 455)
- - Installation location AO = 3: PE 5/OC (b = 455; lT = 650)
- - Installation location AO = 4: PE 5/OC-T (lT = 455; b = 650)
Stop gate VE 5/OCD-1000-E
Please note that in the limit ranges of the permissible weight/speed combinations, the damping behavior may not be optimal., Damped stopping of a workpiece pallet at the defined stop surface and for separating workpiece pallets, Electrical stop gate for the set up of plants without pneumatic system, Can be combined with WT 5, Little installation work as there is no pneumatic system, Low noise development, Loading only in the direction of transport, No spring return, the stop blade of the stop gate is reset or put up by means of a step motor, Hydraulic damping, not adjustable, Transportation Control, Installation location AO = 1: ST 5/OC; AS 5/OC; PE 5/OC; PE 5/OC T, Installation location AO = 2: PE 5/OC; PE 5/OC T (b = 455; lT = 455), Installation location AO = 3: PE 5/OC (b = 455; lT = 650), Installation location AO = 4: PE 5/OC T (lT = 455; b = 650)