Attributes
| Cycle Time |
5s |
| Material information |
Housing: Aluminum, hard anodized,Stop: Steel, hardened |
| Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min |
250 kg |
| Maximum permissible mass workpiece pallet mG at nominal speed vN 15 m/min |
220 kg |
| Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min |
200 kg |
| Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min |
410 kg |
| Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min |
305 kg |
| Min. workpiece pallet weight m |
20 kg |
| Nominal speed [vN] |
6 m/min,9 m/min,12 m/min,15 m/min,18 m/min |
| Notice |
Individual width variants can be ordered |
| Operating temperature [T] max |
+5 ... +60 °C |
| Preferred values |
400,480,640,800,1040,1200 |
| Profile slot |
10 |
| Required accessories |
Actuator and sensor system cables common in the market (5-pole) |
| Track width in direction of transport [b max] |
1200mm |
| Track width in direction of transport [b min] |
400mm |
| Weight |
0kg |
| Workpiece pallet weight [mG] |
410kg |
- To the workpiece pallet separation in sections
- Dampened stop gate
- Can be combined with WT 2/H
- Can be combined with all TS 2plus components
- Loading only in the direction of transport
- No spring return, the stop blade of the stop gate is reset or put up by means of a step motor
- Electrical stop gate for the set-up of plants without pneumatic system
- Little installation work as there is no pneumatic system
- Low noise development
- Notice: A workpiece pallet may only hit the stop if the latter is completely in its top position
- - To the workpiece pallet separation in sections
- - Dampened stop gate
- - Can be combined with WT 2/H
- - Can be combined with all TS 2plus components
- - Loading only in the direction of transport
- - No spring return, the stop blade of the stop gate is reset or put up by means of a step motor
- - Electrical stop gate for the set-up of plants without pneumatic system
- - Little installation work as there is no pneumatic system
- - Low noise development
- - Notice: A workpiece pallet may only hit the stop if the latter is completely in its top position
Stop gate VE 2/D410-EH
To the workpiece pallet separation in sections, Dampened stop gate, Can be combined with WT 2/H, Can be combined with all TS 2plus components, Loading only in the direction of transport, No spring return, the stop blade of the stop gate is reset or put up by means of a step motor, Electrical stop gate for the set up of plants without pneumatic system, Little installation work as there is no pneumatic system, Low noise development, Notice: A workpiece pallet may only hit the stop if the latter is completely in its top position