BELT SECTION BS 1/S
| Clean room classification | ISO class 7 |
| Delivery information | Assembled. Motor included separately. |
| Dry room | <lt/>1 |
| ESD | Yes |
| Length [l2] | 520 ... 5480 |
| Length [l3] | 780 ... 5220 |
| Length [lges max] | 6000mm |
| Length [lges min] | 520mm |
| Length max [l1] | 5740mm |
| Length min [l1] | 260mm |
| Material information | Section profile: Aluminum, natural; anodized,Guide profile: Polyamide,Glide profile: Polyamide |
| Motor connection [AT] | S = Kabel/Stecker,K = Klemmenkasten |
| Nominal speed [vN] | 0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min |
| Notice | Motor mounting MA = M only when b = 160 or b = 161... 720 |
| Preferred values | 80120160 |
| Recommended accessories | Connection kit,Leg set SZ 1 |
| Reversible operation [RV] | zulässig |
| Section load in accumulation operation | 30kg |
| Track width in direction of transport [b max] | 720mm |
| Track width in direction of transport [b min] | 81mm |
| Weight | 0kg |
- Ready for operation conveyor section with own drive. Motor mounting right (MA = R), left (MA = L), with track width b = 160 mm also central (MA = M)
- Segmented belt section with the possibility of up to 3 additional cuts in the longitudinal profile
- Connection with standard profile connectors
- This allows flexible individual parts of the belt section to be removed
- This also causes simpler handling and more efficient transportation of the belt sections
- Depending on the length, the BS 1 is delivered with two, three or four cross connectors
- Section loads up to 30 kg in accumulation operation
- Conveyor medium: Toothed belt with mesh top, suitable for use in an EPA
- Longitudinal transport of the workpiece pallet with segmented conveyor sections of up to 5000 mm
- Transverse transport of the workpiece pallet between parallel conveyor sections (in conjunction with two lift transverse units HQ 1/U)
- Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
- Special models on request
- 1 - Ready for operation conveyor section with own drive. Motor mounting right (MA = R), left (MA = L), with track width b = 160 mm also central (MA = M)
- 2 - Segmented belt section with the possibility of up to 3 additional cuts in the longitudinal profile
- 3 - Connection with standard profile connectors
- 4 - This allows flexible individual parts of the belt section to be removed
- 5 - This also causes simpler handling and more efficient transportation of the belt sections
- 6 - Depending on the length, the BS 1 is delivered with two, three or four cross connectors
- 7 - Section loads up to 30 kg in accumulation operation
- 8 - Conveyor medium: Toothed belt with mesh top, suitable for use in an EPA
- 9 - Longitudinal transport of the workpiece pallet with segmented conveyor sections of up to 5000 mm
- 10 - Transverse transport of the workpiece pallet between parallel conveyor sections (in conjunction with two lift transverse units HQ 1/U)
- 11 - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
- 12 - Special models on request
BS 1/S belt section
Ready for operation conveyor section with own drive. Motor mounting right (MA = R), left (MA = L), with track width b = 160 mm also central (MA = M), Section loads up to 30 kg in accumulation operation, Conveyor medium: Toothed belt with mesh top, suitabl
Ready for operation conveyor section with own drive. Motor mounting right (MA = R), left (MA = L), with track width b = 160 mm also central (MA = M), Section loads up to 30 kg in accumulation operation, Conveyor medium: Toothed belt with mesh top, suitabl
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.