Attributes

Delivery information	Not assembled,Mounting option for the gear motor at the top/horizontally/bottom possible
Gear motor [GM]	0 = Schnittstelle SW27 ohne Getriebemotor,1 = Schnittstelle SW27 mit Getriebemotor,2 = Schnittstelle zu SEW Rundwelle Ø 20 ohne Getriebemotor
Material information	Flange (Lenze): Aluminum,Flange (SEW): Steel,Bracket: Aluminum,Motor flange: Die-cast aluminum,Shaft: Stainless steel,Coupling: Cast steel, brass
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	0 m/min ohne Getriebemotor,2 m/min ggf. Zusatzmaßnahmen erforderlich,4 m/min ggf. Zusatzmaßnahmen erforderlich,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min
Notice	Parameter p is only used to assign the last end plate
Scope of delivery	Incl. fastening material and flange,The corresponding section is not included in the scope of delivery
Weight	0kg

• For face-side driving of conveyor units ST 5/… and CU 5
• Adaptation of the sheet metal parts is required
• Suitable for reversible operation (max. 20 Nm)
• With a Lenze gear motor (GM = 1) or with interface for installing a SEW gear motor (GM = 2)
• Motor connection with plug (AT = S) or terminal box (AT = K)
• Optional frequency converter
• Notice: - Maximum length of the driven total section with p = 130 and 45 Nm motor output = 19.5 m (longer sections on request) - Suitable for driving two connected curves
• 1 - For face-side driving of conveyor units ST 5/… and CU 5
• 2 - Adaptation of the sheet metal parts is required
• 3 - Suitable for reversible operation (max. 20 Nm)
• 4 - With a Lenze gear motor (GM = 1) or with interface for installing a SEW gear motor (GM = 2)
• 5 - Motor connection with plug (AT = S) or terminal box (AT = K)
• 6 - Optional frequency converter
• 7 - Notice: - Maximum length of the driven total section with p = 130 and 45 Nm motor output = 19.5 m (longer sections on request) - Suitable for driving two connected curves

AB 5 drive kit
Motor connection with plug (AT = S) or terminal box (AT = K), Optional frequency converter, For face side driving of conveyor units ST 5/… and CU 5, Adaptation of the sheet metal parts is required, Suitable for reversible operation (max. 20 Nm), With a Le

• 3D CAD
• Data Sheet

Condition of Delivery

Not assembled, incl. fastening material and flange

Mounting option for the gear motor at the top/horizontally/bottom possible

	l = p x n
	p = roller spacing (pitch)
	n = number of rollers

	l = p x n
	p = roller spacing (pitch)
	n = number of rollers

Roller spacing (pitch)

p = 130 mm

Roller spacing (pitch)

p = 195 mm; p = 260 mm; p = 325 mm

Hinweis:

Maximale Länge der angetriebenen Gesamtstrecke bei p = 130 und 45 Nm Motorleistung = 19,5 m (längere Strecken auf Anfrage) Geeignet für den Antrieb von zwei verbundenen Kurven Montage in Kurven, Weichen, Zusammenführungen und Hub-Quereinheiten auf Anfrage

Attachment options for the gear motor

Customer-specific motor

Attachment options for the gear motor

Standard

No.	Material
3842998842	Flange (Lenze): aluminum Flange (SEW): steel Bracket: aluminum Motor flange: die-cast aluminum Shaft: brass Coupling: cast steel; brass