Attributes

Condition on delivery	Not assembled
ESD	yes
Material information	Housing: Aluminum, hard anodized,Stop: Steel, hardened
Notice	High-temperature stop gate on request
Operating temperature [T] max	-20 ... +80 °C
Pneumatic straight connection [Ø]	6mm
Preferred values	48064080010401200
Recommended accessories	Sensor M8x1
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section,Right-angle connector for the air connections in Quickfix design
Track width in the longitudinal conveyor [bL max]	1200mm
Track width in the longitudinal conveyor min [bL min]	480mm
Weight	0kg
Workpiece pallet length [lWT]	400
Workpiece pallet weight [mG]	250kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Slide stop; can be lowered pneumatically, dampened stop, for use with HQ 2/C-H (minimum transverse width from b_Q = 480 mm, minimum width lengthwise from b_L = 640 mm)
• Stopping on the inside of the WT frame module
• Infinitely adjustable damping
• When the pressure is released by a spring into the lock position
• Can be combined with WT 22/H and WT 2/F-H
• Notice: Combination with WT 2/LS not possible
• The slide stop is used in a transverse section that connects more than two longitudinal sections and that requires supplementary stops
• A lift transverse unit can feed in the workpiece pallet onto the longitudinal section when the slide stop is activated
• When depressurized, the pneumatically adjustable slide stop is extended to the upper end position
• Mounting inside the lift transverse unit HQ 2/C-H
• 1 - Slide stop; can be lowered pneumatically, dampened stop, for use with HQ 2/C-H (minimum transverse width from b_Q = 480 mm, minimum width lengthwise from b_L = 640 mm)
• 2 - Stopping on the inside of the WT frame module
• 3 - Infinitely adjustable damping
• 4 - When the pressure is released by a spring into the lock position
• 5 - Can be combined with WT 22/H and WT 2/F-H
• 6 - Notice: Combination with WT 2/LS not possible
• 7 - The slide stop is used in a transverse section that connects more than two longitudinal sections and that requires supplementary stops
• 8 - A lift transverse unit can feed in the workpiece pallet onto the longitudinal section when the slide stop is activated
• 9 - When depressurized, the pneumatically adjustable slide stop is extended to the upper end position
• 10 - Mounting inside the lift transverse unit HQ 2/C-H

VA 2/D-250 Slide Stop
Slide stop, can be lowered pneumatically, damped stop only for use with HQ 2/C-H
Infinitely adjustable damping, Can be combined with WT 22/H and WT 2/F H, Slide stop; can be lowered pneumatically, dampened stop, for use with HQ 2/C H (minimum transverse width from b_Q = 480 mm, minimum width lengthwise from b_L = 6

• 3D CAD
• Data Sheet

Condition of Delivery

Not assembled

Scope of delivery

Incl. all fastening material to mount on ST 2/... conveyor section

Right-angle connector for the air connections in Quickfix design

Position sensor

Characteristic curve diagram
damping setting of accumulation roller chain μ=0.02

Dmax/min damping setting

1)	Damping effect limited, use of a VE 2/RS-H return stop recommended
2)	Recommended range
3)	not possible

Characteristic curve diagram
damping setting of flat top chain μ=0.2

Dmax/min damping setting

1)	Damping effect limited, use of a VE 2/RS-H return stop recommended
2)	Recommended range
3)	not possible

VA 2/D-250 Slide Stop

The slide stop is used in a transverse section that connects more than two longitudinal sections and that requires supplementary stops. A lift transverse unit can feed in the workpiece pallet onto the longitudinal section when the slide stop is activated. The pneumatically adjustable slide stop is extended to the upper end position when the system is depressurized. Mounting inside the HQ 2/C-H lift transverse unit.

Circuit diagram

1)	Not included in the scope of delivery

No.			3842998796
Max. total weight of workpiece pallet	mG	kg	250
Max. operating temperature 1)	T	°C	-20 ... +80
Material entry			Housing: Aluminum, hard anodized Stop: Steel, hardened
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	6
Length of workpiece pallet		mm	400

1)	High-temperature stop gate on request