Attributes

Delivery information	Assembly kit
Gear motor [GM]	0 = Schnittstelle SW27 ohne Getriebemotor,1 = Schnittstelle SW27 mit Getriebemotor hohes Drehmoment,2 = Schnittstelle SEW 47 ohne Getriebemotor,4 = Schnittstelle SEW SA37 ohne Getriebemotor
Material information	Flange: Diecast aluminum,Shaft: STS,Connecting sheet, cover sheet: Steel, galvanized,Ball catch coupling: Steel
Modification	Additional versions are available on request from our modification department. ([email protected])
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	5 m/min,10 m/min,13 m/min,21 m/min
Notice	On drives with a frequency converter (FU), the speed must be limited to a maximum of 21 m/min using control technology
Required accessories	Motor support
Scope of delivery	Incl. fastening material,Incl. guard plate (contact protection from below),Incl. flange, shaft and gear motor (GM = 1, GM = 3)
Size [b]	6590
Weight	0kg

• For building a circulation system with curve wheel (AC = 0) or an alpine conveyor tower (AC = 1)
• With preset ball catch coupling (Kpg = 1) for limiting the torque or for the drive kit of the alpine conveyor tower (AC = 1) also without (Kpg = 0). The adjustable ball catch coupling is protected and integrated in the flange to save space and does not serve personal protection
• With Lenze gear motor (GM = 1, without surface and corrosion protection) or with an interface for attaching an SEW SA47 gear motor (GM = 2). In order to ensure a compact installation situation, smaller and lighter gear motors (GM=3) or an interface for the installation of an SEW SA37 gear motor (GM=4) are available for applications with low load. An adaptation by the customer is required for attaching other gear motors (GM = 0),
• Fixed or adjustable speed (vN). For an adjustable speed, gear motors must be retrofitted with an FU (frequency converter)
• Connections are made using terminal boxes (AT = K) or plugs (AT = S)
• 1 - For building a circulation system with curve wheel (AC = 0) or an alpine conveyor tower (AC = 1)
• 2 - With preset ball catch coupling (Kpg = 1) for limiting the torque or for the drive kit of the alpine conveyor tower (AC = 1) also without (Kpg = 0). The adjustable ball catch coupling is protected and integrated in the flange to save space and does not serve personal protection
• 3 - With Lenze gear motor (GM = 1, without surface and corrosion protection) or with an interface for attaching an SEW SA47 gear motor (GM = 2). In order to ensure a compact installation situation, smaller and lighter gear motors (GM=3) or an interface for the installation of an SEW SA37 gear motor (GM=4) are available for applications with low load. An adaptation by the customer is required for attaching other gear motors (GM = 0),
• 4 - Fixed or adjustable speed (vN). For an adjustable speed, gear motors must be retrofitted with an FU (frequency converter)
• 5 - Connections are made using terminal boxes (AT = K) or plugs (AT = S)

The 180° curve wheel (aluminum version) is quickly transformed into a curve wheel drive by using a drive kit.
The curve wheel drive kit contains a flange for attaching the motor to the curve wheel, a hexagonal shaft for transmission of force, as well as other optional equipment features. The transmission of force of several superimposed curve wheels is possible; the motor torque then has to be distributed across all curve wheel levels.
With Lenze gear motor (GM = 1, without surface and corrosion protection) or with an interface for attaching an SEW SA47 gear motor (GM = 2). In order to ensure a compact installation situation, smaller and lighter gear motors (GM=3) or an interface for th

• 3D CAD
• Data Sheet

Section support 160-320 AL

Section support 160-320 AL

Holder is easily centered in the slot thanks to centering lugs Very simple assembly thanks to pluggable screw connection Easy-to-clean design with draining surfaces

CAD data

Drive kit curve wheel AL

Curve wheel drive AL GM = 0

Curve wheel drive AL GM = 2

The 180° curve wheel (aluminum version) is quickly transformed into a curve wheel drive by using a drive kit. It contains a flange for attaching the motor to the curve wheel, a hexagonal shaft for the force transmission, as well as other optional equipment features.

For constructing a circuit with curve wheel (AC = 0) or an alpine conveyor (AC = 1) With preset ball catch coupling (Kpg = 1) for limiting torque or for the alpine conveyor drive kit (AC = 1), also without (Kpg = 0). The coupling does not serve as personal protection. With a Lenze gear motor (GM = 1) or with interface for installing an SEW SA47 gear motor (GM = 2).

For the installation of other gear motors (GM = 0), the customer is required to make adaptations.

Fixed or adjustable speed (vN). For an adjustable speed, gear motors must be retrofitted with an FU (frequency converter). Different voltages and supply frequencies (U/f) Connection via terminal boxes (AT = K) or plugs (AT = S) GM = 1 without surface and corrosion protection Conveying speed: vN = 4-21 m/min. For drives with frequency converters (FU), the speed must be limited to a maximum of 21 m/min by a control system.

Complete drive consisting of curve wheel AL and configurable drive kit

Drives for multi-track systems and alpine conveyor

Innovative drive concept

	Material
Drive kit curve wheel VFplus AL	Flange: Aluminum, die-cast Shaft: STS Connecting sheet, cover sheet: Steel, galvanized Ball catch coupling: Steel