Attributes

Delivery information	Fully assembled,Motors included separately
Length [l]	1264 ... 6000 mm if BG = 1,1564 ... 6000 mm if BG = 2,1864 ... 6000 mm if BG = 3,2230 ... 6000 mm if BG = 4,2530 ... 6000 mm if BG = 5
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min,21 m/min,36 m/min
Required accessories	Leg set SZS/B
Track width [b1 max]	600mm
Track width [b1 min]	375mm
Track width in direction of transport [b max]	675mm
Track width in direction of transport [b min]	450mm
Weight	0kg

• Lift transverse unit LTS/…, consisting of a belt section CSS/… and a lift unit for setting up right-angled section branches
• Version with two to four tracks. Distance between the tracks can be determined individually (b1 to b3). Comply with minimum dimensions
• Permissible load: ‒ Per track: max. 0.15 kg/cm support surface length and max. 40 kg for LTS/F, max. 60 kg for LTS/B ‒ Per belt section: max. 120 kg
• O-rings for high friction coefficients and improved static friction for transverse conveyor
• Tracks without lateral guide
• Reversible across the entire value range
• Simple exchange of the toothed belts
• Gear motors are suitable for operation with frequency converter
• Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 4; MS = 1 denotes the left track in the direction of transport)
• Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
• Two lift positions
• 1 - Lift transverse unit LTS/…, consisting of a belt section CSS/… and a lift unit for setting up right-angled section branches
• 2 - Version with two to four tracks. Distance between the tracks can be determined individually (b1 to b3). Comply with minimum dimensions
• 3 - Permissible load: ‒ Per track: max. 0.15 kg/cm support surface length and max. 40 kg for LTS/F, max. 60 kg for LTS/B ‒ Per belt section: max. 120 kg
• 4 - O-rings for high friction coefficients and improved static friction for transverse conveyor
• 5 - Tracks without lateral guide
• 6 - Reversible across the entire value range
• 7 - Simple exchange of the toothed belts
• 8 - Gear motors are suitable for operation with frequency converter
• 9 - Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 4; MS = 1 denotes the left track in the direction of transport)
• 10 - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
• 11 - Two lift positions

Lift transverse unit LTS/F-2
Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K), Gear motors are suitable for operation with frequency converter, Lift transverse unit LTS/…, consisting of a belt section CSS/… and a lift unit for setting up right angled sect

• 3D CAD
• Data Sheet