Attributes

Delivery information	b ≤ 2000 mm: Assembled<LineBreak/>b <gt/> 2000 mm: Partially assembled,Motor included separately
ESD	Yes
Length max [l max]	290mm
Length min [L min]	6000mm
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	0 m/min, U = 0, f = 0, ohne Motor und ohne Getriebe,0 m/min, U = 0,f = 50/60 Hz: ohne Motor, mit Getriebe (wenn technisch sinnvoll),6 m/min,9 m/min,12 m/min,15 m/min,18 m/min,21 m/min,36 m/min
Notice	bx<sub>min</sub> = 165 mm for motor mounting between the tracks,For bmin, the distance dimension with the highest index is determined
Recommended accessories	Frames SFS,Leg set SZS/B,Frequency converter FU
Section load in accumulation operation	120kg
Track width [b1 max]	1000mm
Track width [b1 min]	85mm
Track width [b2 max]	1000mm
Track width [b2 min]	85mm
Track width [b3 max]	1000mm
Track width [b3 min]	85mm
Track width [b4 max]	1000mm
Track width [b4 min]	85mm
Track width in direction of transport [b max]	3000mm
Track width in direction of transport [b min]	160mm
Tracks	3
Weight	0kg

• Minor corrections of the end position of the solar modules on the belt section possible
• Most cost-effective solution
• Longitudinal conveyor for glass modules of various dimensions
• Longitudinal conveyor for wafer trays
• Not intended for accumulation operation
• Belt section consisting of two to five tracks for secure support of the glass modules across the entire width. Distance between the tracks can be determined individually (b1 to b4)
• Permissible load: ‒ Per track: max. 0.15 kg/cm support surface length and max. 60 kg ‒ Per belt section: max. 120 kg
• Suitable for reversible operation (up to 3000 mm)
• Conveyor medium: Special textile toothed belt. Due to the low friction coefficient in relation to the workpiece, particularly well suited for lateral positioning procedures
• Simple exchange of the toothed belts by dismantling from above without realignment
• Gear motors are suitable for operation with frequency converter
• Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 5; MS = 1 denotes the left track in the direction of transport). When mounting the motor between the tracks, observe a minimum distance of 165 mm (b1 to b4)
• Motor mounting outside: suspended or lying down; Motor mounting between the tracks: suspended
• Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
• Version with lateral guide (FP = 1) preferably for fully framed glass modules; version without lateral guide (FP = 0) preferably for unprocessed glass modules with rough edges
• Suitable for use in cleanroom environments up to cleanroom class 6 in accordance with ISO 14644-1
• 1 - Minor corrections of the end position of the solar modules on the belt section possible
• 2 - Most cost-effective solution
• 3 - Longitudinal conveyor for glass modules of various dimensions
• 4 - Longitudinal conveyor for wafer trays
• 5 - Not intended for accumulation operation
• 6 - Belt section consisting of two to five tracks for secure support of the glass modules across the entire width. Distance between the tracks can be determined individually (b1 to b4)
• 7 - Permissible load: ‒ Per track: max. 0.15 kg/cm support surface length and max. 60 kg ‒ Per belt section: max. 120 kg
• 8 - Suitable for reversible operation (up to 3000 mm)
• 9 - Conveyor medium: Special textile toothed belt. Due to the low friction coefficient in relation to the workpiece, particularly well suited for lateral positioning procedures
• 10 - Simple exchange of the toothed belts by dismantling from above without realignment
• 11 - Gear motors are suitable for operation with frequency converter
• 12 - Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 5; MS = 1 denotes the left track in the direction of transport). When mounting the motor between the tracks, observe a minimum distance of 165 mm (b1 to b4)
• 13 - Motor mounting outside: suspended or lying down; Motor mounting between the tracks: suspended
• 14 - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
• 15 - Version with lateral guide (FP = 1) preferably for fully framed glass modules; version without lateral guide (FP = 0) preferably for unprocessed glass modules with rough edges
• 16 - Suitable for use in cleanroom environments up to cleanroom class 6 in accordance with ISO 14644-1

Belt section CSS/B-3
Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K), Minor corrections of the end position of the solar modules on the belt section possible, Most cost effective solution, Longitudinal conveyor for glass modules of various dimens

• 3D CAD
• Data Sheet