Attributes

Productgroup ID	2
Workpiece pallet total weight [mG]	30kg
ESD	yes
Pneumatic straight connection [Ø]	6mm
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar
Weight	0kg
Notice	Pneumatic equipment PN = 2: Upper and middle lift position,Pneumatic equipment PN = 3: Upper, middle and lower lift position
Scope of delivery	Incl. fastening material,Pneumatic equipment for two or three positions,Assembly kit for electrical position inquiry,Incl. drive kit (required to drive an HQ 2/T)
Delivery information	Fully assembled
Recommended accessories	Damper DA 2/60 for the outfeeding of workpiece pallets at v<sub>N</sub> > 9 m/min,Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets
Required accessories	1x M12x1 sensor with rated sensing range S for each position inquiry<sub>N</sub> = 4 mm,Housing Element SK 2
Preferred values	160,240,320,400,480,640,800

• Lift transverse unit without own drive for feeding out from a longitudinal section into a transverse section with a roller section and vice versa
• Used together with the HQ 2/O as a tandem design
• Driven by toothed belt coupling
• Suitable for use in special designs
• In two sizes with one or two lifting cylinders
• Conveyor medium: Toothed belt (suitable for use in an EPA)
• Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• n.a.
• Reversible operation possible
• - n.a.

Lift Transverse Unit HQ 2/T
Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions, Conveyor medium: Toothed belt (suitable for use in an EPA), Reversible operation possible, Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST

• 3D CAD
• Data Sheet

Required accessories

1x M12x1 sensor with rated sensing range S for each position inquiryN = 4 mm

Housing Element SK 2

Recommended accessories

Damper DA 2/60 for the outfeeding of workpiece pallets at vN > 9 m/min

Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets

Housing Element SK 2

Housing Element SK 2

Housing element for HQ 2/T

CAD data

M12 sensor with M12x1 push-in fitting

M12 sensor with M12x1 push-in fitting

CAD data

M12 sensor with M8x1 push-in fitting

M12 sensor with M8x1 push-in fitting

CAD data

Condition of Delivery

Fully assembled

Scope of delivery

Incl. fastening material

Pneumatic equipment for two or three positions

Assembly kit for electrical position inquiry

Incl. drive kit (required to drive an HQ 2/T)

Lift Transverse Unit HQ 2/T

1)

Drive kit

Lift Transverse Unit HQ 2/T

L Transport direction of longitudinal section

Q Transport direction of transverse section

1 Stroke

2 Housing element

3 Drive kit for HQ 2/O-HQ 2/T

*) 180 mm with profile height of 80 mm, 200 mm with profile height of 100 mm

Circuit diagram for unit with pneumatic equipment for two positions PN = 2, BG 1

1)	Not included in the scope of delivery

Circuit diagram for unit with pneumatic equipment for three positions PN = 3, BG 1

1)	Not included in the scope of delivery

Circuit diagram for unit with pneumatic equipment for two positions PN = 2, BG 2

1)	Not included in the scope of delivery

Circuit diagram for unit with pneumatic equipment for three positions PN = 3, BG 2

1)	Not included in the scope of delivery

Pneumatic equipment

PN = 2	PN = 3

No.			3842998114
ESD			yes
Reversible operation			Reversible operation possible
Size	BG		BG 1; BG 2
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	6