LIFT TRANSFER UNIT HQ 2/O
| Combination options bQ x bL | BG 1,160 x 160; 240; 320,240 x 160; 240; 320; 400,320 x 160; 240; 320; 400,400 x 240; 320; 400,480 x 320,BG 2,400 x 480,480 x 400; 480,640 x 400; 480,800 x 400; 480 |
| Conveyor medium | Toothed belt (suitable for use in an EPA) |
| Delivery information | Fully assembled |
| ESD | yes |
| Notice | Pneumatic equipment PN = 2: Upper and middle lift position,Pneumatic equipment PN = 3: Upper, middle and lower lift position |
| Pneumatic straight connection [Ø] | 6mm |
| Preferred values | 1.6024032040048E+20 |
| Recommended accessories | Damper DA 2/60 for the outfeeding of workpiece pallets at v<sub>N</sub> <gt/> 9 m/min,Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets |
| Required accessories | 1x M12x1 sensor with rated sensing range S for each position inquiry<sub>N</sub> = 4 mm,Belt section BS 2/T, BS 2/TE for drive,HQ 2/T in the tandem version,Connection belt set for HQ 2/O drive via a belt section,Housing element SK 2/B |
| Reversible operation [RV] | Reversierbetrieb möglich |
| Scope of delivery | Incl. fastening material,Pneumatic equipment for two or three positions,Assembly kit for electrical position inquiry |
| Weight | 0kg |
| Workpiece pallet weight [mG] | 30kg |
| required compressed air connection [pmax] | 6bar |
| required compressed air connection [pmin] | 4bar |
- Lift transverse unit without own drive for feeding out from a longitudinal section into a transverse section with a roller section and vice versa
- Driven by toothed belt coupling
- The low height is suitable for the operation of double-deck conveyor sections
- Suitable for use in special designs
- Vertical movement is delivered by pneumatic cylinders. There are two sizes available for total weights (workpiece pallet + load) of up to 30 kg: Size 1 (BG 1) with 1 pneumatic cylinder. Size 2 (BG 2) with 2 pneumatic cylinders for workpiece pallet dimensions from 400 x 480 mm
- Conveyor medium: Toothed belt (suitable for use in an EPA)
- Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
- Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
- Can be combined with WT 2 and WT 2/F
- 1 - Lift transverse unit without own drive for feeding out from a longitudinal section into a transverse section with a roller section and vice versa
- 2 - Driven by toothed belt coupling
- 3 - The low height is suitable for the operation of double-deck conveyor sections
- 4 - Suitable for use in special designs
- 5 - Vertical movement is delivered by pneumatic cylinders. There are two sizes available for total weights (workpiece pallet + load) of up to 30 kg: Size 1 (BG 1) with 1 pneumatic cylinder. Size 2 (BG 2) with 2 pneumatic cylinders for workpiece pallet dimensions from 400 x 480 mm
- 6 - Conveyor medium: Toothed belt (suitable for use in an EPA)
- 7 - Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
- 8 - Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
- 9 - Can be combined with WT 2 and WT 2/F
Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions, Conveyor medium: Toothed belt (suitable for use in an EPA), Can be combined with WT 2 and WT 2/F, Suitable for mounting on an ST 2/… section with a profile width of 45 mm o
Required accessories
| 1x M12x1 sensor with rated sensing range S for each position inquiryN = 4 mm |
| Belt section BS 2/T, BS 2/TE for drive |
| HQ 2/T in the tandem version |
| Connection belt set for HQ 2/O drive via a belt section |
| Housing element SK 2/B |
Recommended accessories
| Damper DA 2/60 for the outfeeding of workpiece pallets at vN > 9 m/min |
| Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets |
Housing element SK 2/B
Housing element SK 2/B
Housing element for HQ 2/O and HQ 2/SCAD data
Lift Transverse Unit HQ 2/O
L Transport direction of longitudinal section
Q Transport direction of transverse section
1 Stroke 2 housing element
3 Toothed belt for drive
4 Attachment for BS 2/T
*) 180 mm with profile height of 80 mm, 200 mm with profile height of 100 mm
The HQ 2/O does not have its own drive. Drive is provided by a toothed belt coupled with a BS 2/T or BS 2/TE belt section, or by a separate drive motor. It is a part of all EQ 2/… electrical transverse conveyors and can also be used in special system designs. The vertical movement is delivered by pneumatic cylinders.
Two sizes are available: Size 1 (BG 1) for overall weights (workpiece pallet + load) of up to 30 kg with one lifting cylinder. Size 2 (BG 2) for overall weights (workpiece pallet + load) of up to 50 kg with two lifting cylinders for workpiece pallet dimensions of 400 x 480 mm and above.
Circuit diagram for unit with pneumatic equipment for two positions PN = 2, BG 1
| 1) | Not included in the scope of delivery |
Circuit diagram for unit with pneumatic equipment for three positions PN = 3, BG 1
| 1) | Not included in the scope of delivery |
Circuit diagram for unit with pneumatic equipment for two positions PN = 2, BG 2
| 1) | Not included in the scope of delivery |
Circuit diagram for unit with pneumatic equipment for three positions PN = 3, BG 2
| 1) | Not included in the scope of delivery |
Pneumatic equipment
|
PN = 2 |
PN = 3 |
|
|
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.