Attributes

Delivery information	Fully assembled
Length in direction of transport [lT]	455650845
Positioning unit length [lPE]	4.7147157657676E+17
Positioning unit width [bPE]	4.4144163663683E+17
Preferred values	4556508451040
Recommended accessories	Lateral guide cover,Protective sleeves
Required accessories	VE 5/200, VE 5/D‑300, VE 5/D‑301 or VE 5/D‑1000 stop gate,A position inquiry for the workpiece pallet on the PE is only possible through use of a stop gate VE 5/D-300 or VE 5/D-1000.,SH 2/U-H switch bracket
Scope of delivery	Incl. fastening material for mounting the PE 5/L-T in ST 5/XH conveyor sections, and stop kit for VE 5/D‑300 and VE 5/D‑1000.
Track width [b]	4556508451040
Weight	0kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	5bar

• Positioning a workpiece pallet in a manual or automated processing station in the transverse conveyor with high positioning accuracy requirements (±0.3 mm)
• Can be used with all WT 5 workpiece pallets
• Installation only possible from above
• Lift over transport level: 5 mm
• Positioning accuracy: ±0.3 mm in x and y direction
• Permissible vertical process force with center load: up to 3500 N²⁾ depending on WT weight, i.e. permitted load of 3500 N – weight WT = possible process force
• Suitable for ST 5/XH and ST 5/H (not ST 5/XH‑FR or ST 5/H‑FR)
• Compressed air connection: 5 ... 6 bar
• Push in air connection: 8 mm
• ²⁾ If assembling in a ST 5/H section place legs directly in front of and behind the PE 5/L-T.
• 1 - Positioning a workpiece pallet in a manual or automated processing station in the transverse conveyor with high positioning accuracy requirements (±0.3 mm)
• 2 - Can be used with all WT 5 workpiece pallets
• 3 - Installation only possible from above
• 4 - Lift over transport level: 5 mm
• 5 - Positioning accuracy: ±0.3 mm in x and y direction
• 6 - Permissible vertical process force with center load: up to 3500 N²⁾ depending on WT weight, i.e. permitted load of 3500 N – weight WT = possible process force
• 7 - Suitable for ST 5/XH and ST 5/H (not ST 5/XH‑FR or ST 5/H‑FR)
• 8 - Compressed air connection: 5 ... 6 bar
• 9 - Push in air connection: 8 mm
• 10 - ²⁾ If assembling in a ST 5/H section place legs directly in front of and behind the PE 5/L-T.

PE 5/L-T positioning unit
Can be used with all WT 5 workpiece pallets, Compressed air connection: 5 ... 6 bar, Lift over transport level: 5 mm, Positioning accuracy: ±0.3 mm in x and y direction, Suitable for ST 5/XH and ST 5/H (not ST 5/XH‑FR or ST 5/H‑FR), Push in air connection

• 3D CAD
• Data Sheet

Required accessories

VE 5/D-1000 stop gate, VE 5/D-300 stop gate, VE 5/D-301 stop gate or VE 5/200 stop gate (A position inquiry for the workpiece pallet on the PE is only possible through use of a VE 5/D-300 or VE 5/D-1000 stop gate.)

SH 2/U-H switch bracket

Recommended accessories

Lateral guide cover

Protective sleeves

Condition of Delivery

Fully assembled

Scope of delivery

Incl. fastening material for mounting the PE 5/L-T in ST 5/XH conveyor sections, and stop kit for VE 5/D‑300 and VE 5/D‑1000.

PE 5/L-T positioning unit

bL (mm)	bQ (mm)	bPE (mm)	lPE (mm)
455	455; 650	441	471
650	650	636	576
650	845	636	576
845	845	831	764
845	1040	831	764
bL = track width in direction of transport (longitudinal conveyor)
bQ = track width in direction of transport (transverse conveyor)
bPE = Breite Positioniereinheit
lPE = Länge Positioniereinheit

Set-up, positioning, and orientation

S1	=	WT before VE
S2	=	WT arrival
S3	=	Lift end position at bottom
S4	=	Lift end position at top
S5	=	WT after VE
Y1	=	Open VE (Z1)
Y2	=	WT lift (Z2)
Y3	=	Open VE (Z3)
A1	=	Start of processing
A2	=	End of processing

No.
3842998049