Attributes

Clean room classification	ISO class 7
Conveyor medium	Flat top chain (with KA = A suitable for use in an EPA)
Conveyor medium length [lAS]	625mm
Delivery information	Fully assembled
Dry room	<lt/>1
ESD	yes
Motor connection [AT]	S = Kabel/Stecker,K = Klemmenkasten
Nominal speed [vN]	0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min
Notice	Chain suitable for use in an EPA (KA = A),Individual width variants can be ordered
Preferred values	1.6024032040048E+28
Recommended accessories	Connection Kits,LU 2 Automatic Lubrication Unit
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section
Section load in accumulation operation	400kg
Track width in direction of transport [b max]	1200mm
Track width in direction of transport [b min]	160mm
Weight	0kg

• Drive for conveyor unit self-assembly
• Conveyor medium: Flat top chain (where KA = A suitable for use in an EPA)
• Motor mounting on right, left or centrally (centrally on track widths of 240 mm and above)
• Motor connection: optionally with cable/plug or terminal box motor connection
• Special models on request
• Reversible operation not permitted
• Use with medium accumulation loads
• We strongly advise using the LU 2 automatic lubrication unit
• 1 - Drive for conveyor unit self-assembly
• 2 - Conveyor medium: Flat top chain (where KA = A suitable for use in an EPA)
• 3 - Motor mounting on right, left or centrally (centrally on track widths of 240 mm and above)
• 4 - Motor connection: optionally with cable/plug or terminal box motor connection
• 5 - Special models on request
• 6 - Reversible operation not permitted
• 7 - Use with medium accumulation loads
• 8 - We strongly advise using the LU 2 automatic lubrication unit

Drive Module AS 2/C-400
Special models on request, Motor connection: optionally with cable/plug or terminal box motor connection, Motor mounting on right, left or centrally (centrally on track widths of 240 mm and above), Reversible operation not permitted, Use with medium accum

• 3D CAD
• Data Sheet

Scope of delivery

Incl. all fastening material to mount on ST 2/... conveyor section

Condition of Delivery

Fully assembled

Drive Module AS 2/C-400

The AS 2/C-... drive module drives the conveyor medium flat top chain in self-built conveyor units with section, return unit and flat top chain.

Energy efficiency – Rexroth 4EE

No.			3842998038
Max. section load in accumulation operation		kg	400
ESD 1)			yes
Required conveyor media length 2)	lAS	mm	625

1)	Chain is suitable for use in an EPA (KA = A)
2)	Formula for calculating the conveyor medium, see table

Motor connection

Transport and nominal speed vN

Motor data