Attributes

Productgroup ID	2
Track width in the transverse conveyor min [bQ min]	443
Workpiece pallet total weight [mG]	250kg
Track width in the transverse conveyor max [bQ max]	1243
Delivery unit	1
ESD	yes
Track width in the longitudinal conveyor [bL max]	1243mm
Track width in the longitudinal conveyor min [bL min]	551mm
Weight	0kg
Scope of delivery	HQ 4 incl. fastening material for mounting in the conveyor unit (AO = ST 4) or belt section (AO = BS 4)
Delivery information	Fully assembled
Required accessories	For workpiece pallets up to 100 kg: 1x DA 4/100 damper,For workpiece pallets up to 250 kg: 1x DA 4/250 damper,Switch holder for 12 mm sensor for position inquiry,For a branch line / reversible operation, two dampers are required per lift transverse unit.
Installation location [AO]	ST 4; BS 4
Preferred values	443,643,843,1043,1243

• For the transverse conveying of WT 4 and WT 4/F workpiece pallets
• Outfeeding of workpiece pallets from a longitudinal section to a transverse section. With the appropriate system layout, the outfeeding of workpiece pallets to the left and right is possible
• Outfeeding of workpiece pallets from a transverse section to a longitudinal section
• Flat construction permits system layouts on several levels
• Synchronized lifting cylinders for uniform and parallel lifting movement
• Stops on the inside and therefore no interfering contours
• Conveyor Medium Flat Top Chain
• Manual chain tensioner
• Suitable for reversible operation (RV = 1)
• Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)

HQ 4 lift transverse unit
Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K), Conveyor Medium Flat Top Chain, Flat construction permits system layouts on several levels, For the transverse conveying of WT 4 and WT 4/F workpiece pallets, Outfeeding of wor

• 3D CAD