BELT SECTION BS 2/S
| Conveyor medium | Toothed belt (suitable for use in an EPA) |
| Delivery information | Fully assembled |
| ESD | Yes |
| Length [l2] | 0,900 ... 5500 |
| Length [l3] | 0,1350 ... 5500 |
| Length [lges max] | 6000mm |
| Length [lges min] | 900mm |
| Length max [l max] | 900mm |
| Length max [l1] | 5550mm |
| Length min [L min] | 6000mm |
| Length min [l1] | 450mm |
| Material information | Section profile: Aluminum, natural; anodized,Guide profile: Polyamide,Glide profile: Polyamide |
| Motor connection [AT] | O = ohne Motor,S = Kabel/Stecker,K = Klemmenkasten |
| Nominal speed [vN] | 0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min |
| Notice | When MA = M and b = 160 mm, the max. section load is only 30 kg,Individual width variants can be ordered |
| Recommended accessories | Connection kits for longitudinal conveyors,Leg sets SZ 2/... |
| Section load in accumulation operation | 60kg |
| Track width in direction of transport [b max] | 1200mm |
| Track width in direction of transport [b min] | 160mm |
| Weight | 0kg |
- The belt section is a ready-to-use conveyor section with built-in drive for the transportation of workpiece pallets in the longitudinal direction or for the transverse conveying of the workpiece pallet between parallel conveyor sections in conjunction with two HQ 2 lift transverse units.
- Segmented belt section with the possibility of up to 3 additional cuts in the longitudinal profile
- Connection with standard profile connectors
- This allows flexible individual parts of the belt section to be removed
- This also causes simpler handling and more efficient transportation of the belt sections
- Accumulation operation possible
- Conveyor medium: Toothed belt (suitable for use in an EPA)
- Reversible operation possible
- Can be combined with WT 2, WT 2/E, WT 2/F, WT 2/LS
- Motor mounting on right, left or centrally (centrally on track widths of 240 mm and above)
- Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
- Special models on request
- Positioning of WTs in the area of the drive heads/return heads is not permitted.
- 1 - The belt section is a ready-to-use conveyor section with built-in drive for the transportation of workpiece pallets in the longitudinal direction or for the transverse conveying of the workpiece pallet between parallel conveyor sections in conjunction with two HQ 2 lift transverse units.
- 2 - Segmented belt section with the possibility of up to 3 additional cuts in the longitudinal profile
- 3 - Connection with standard profile connectors
- 4 - This allows flexible individual parts of the belt section to be removed
- 5 - This also causes simpler handling and more efficient transportation of the belt sections
- 6 - Accumulation operation possible
- 7 - Conveyor medium: Toothed belt (suitable for use in an EPA)
- 8 - Reversible operation possible
- 9 - Can be combined with WT 2, WT 2/E, WT 2/F, WT 2/LS
- 10 - Motor mounting on right, left or centrally (centrally on track widths of 240 mm and above)
- 11 - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
- 12 - Special models on request
- 13 - Positioning of WTs in the area of the drive heads/return heads is not permitted.
BS 2/S belt section
Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K), Special models on request, Segmented belt section with the possibility of up to 3 additional cuts in the longitudinal profile, Connection with standard profile connectors, This
Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K), Special models on request, Segmented belt section with the possibility of up to 3 additional cuts in the longitudinal profile, Connection with standard profile connectors, This
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.