Attributes

Productgroup ID	2
Track width in the transverse conveyor min [bQ min]	480mm
Workpiece pallet total weight [mG]	240kg
Track width in the transverse conveyor max [bQ max]	1200mm
Dry room	<1
ESD	yes
Pneumatic straight connection [Ø]	8mm
Track width in the longitudinal conveyor [bL max]	1200mm
Track width in the longitudinal conveyor min [bL min]	640mm
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar
Weight	0kg
Notice	Individual width variants available for track width in longitudinal conveyor,Individual width variants available for track width in transverse conveyor,Chain suitable for use in an EPA
Scope of delivery	Incl. fastening material,Switch holder for 12 mm sensor for position inquiry,Assembly kit for electrical position inquiry,Lateral guide kit for b<sub>l</sub> ≤ 640 mm or for b<sub>l </sub>> 640 mm
Delivery information	Fully assembled,Kits for lateral guides included
Recommended accessories	Dampers DA 2/100-E, DA 2/150-E or a fixed stop (included in the scope of delivery) can be used for outfeeding the WT 2, WT 2/F, WT 2/H and 2/F-H workpiece pallets. Damper DA 2/100-C can be used at the belt end for outfeeding a WT 2 or WT 2/F workpiece pallet.,Dampers DA 2/100-H or DA 2/250-H for outfeeding of the workpiece pallets WT 2/H and WT 2/F-H,A fixed stop (included in the scope of delivery) or the DA 2/100-C damper can be used for infeeding the WT 2 and WT 2/F workpiece pallet. This is also possible in combination with rocker WI 2, WI 2/X, WI 2/D, WI 2/M.,The DA 2/100-H and DA 2/250-H dampers can be used for infeeding the WT 2/H and WT 2/F-H workpiece pallets.
Required accessories	M12x1 sensor for position inquiry,Dampers for outfeeding and infeeding workpiece pallets
Preferred values	480,640,800,1040,1200

• Lift transverse unit for feeding out of a from longitudinal section into a transverse section and vice versa
• The particularly compact design permits system layouts on several levels when space is limited
• Use for high total weights up to 2 kg/cm on the smallest side of the workpiece pallet and up to 240 kg
• Synchronized lifting movement of the four block cylinders for uniform and parallel lifting movement
• Integrated chain tensioner; to be adjusted manually
• Conveyor medium: Duplex chain (suitable for use in an EPA)
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• Depending on the installation, height-adjustable lateral guides can be used as a fixed stop for exporting or as a lateral guide when changing workpiece pallets
• Fixed stops in the form of adjustable/movable lateral guides made of strip steel
• Can be combined with WT 2, WT 2/E and WT 2/F
• Accumulation operation not permitted
• Reversible operation possible
• Only workpiece pallets with PE wear pad are permitted

Lift transverse unit HQ 2/G-H
Accumulation operation not permitted, Reversible operation possible, Conveyor medium: Duplex chain (suitable for use in an EPA), Integrated chain tensioner; to be adjusted manually, Only workpiece pallets with PE wear pad are permitted, Suitable for mount

• 3D CAD
• Data Sheet

Required accessories

M12x1 sensor for position inquiry

Dampers for outfeeding and infeeding workpiece pallets

Recommended accessories

Dampers DA 2/100-E, DA 2/150-E or a fixed stop (included in the scope of delivery) can be used for outfeeding the WT 2, WT 2/F, WT 2/H and  2/F-H workpiece pallets. Damper DA 2/100-C can be used at the belt end for outfeeding a WT 2 or WT 2/F workpiece pallet.

Dampers DA 2/100-H or DA 2/250-H for outfeeding of the workpiece pallets WT 2/H and WT 2/F-H

A fixed stop (included in the scope of delivery) or the DA 2/100-C damper can be used for infeeding the WT 2 and WT 2/F workpiece pallet. This is also possible in combination with rocker WI 2, WI 2/X, WI 2/D, WI 2/M.

The DA 2/100-H and DA 2/250-H dampers can be used for infeeding the WT 2/H and WT 2/F-H workpiece pallets.

Condition of Delivery

Fully assembled

Kits for lateral guides included

Scope of delivery

Incl. fastening material

Switch holder for 12 mm sensor for position inquiry

Assembly kit for electrical position inquiry

Lateral guide kit for bl ≤ 640 mm or for bl > 640 mm

Dimensions

1)	Depending on motor size, see selection table motors

Circuit diagram

1)	Not included in the scope of delivery

Lift positions

1)	Lower position
2)	Middle position
3)	Upper position
4)	*) Transport level = 0

No.			3842996370
Max. total weight of workpiece pallet	mG	kg	240
ESD 1)			yes
Cleanroom class			ISO class 7
Dry room	r.F.	%	<1
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	8

1)	Chain suitable for use in an EPA