Attributes
| Clean room classification |
ISO class 7 |
| Condition on delivery |
Assembled |
| Conveyor medium |
Toothed belt (suitable for use in an EPA) |
| Dry room |
<lt/>1 |
| ESD |
Yes |
| Length [L1] |
UM = 0; 1; 2; 3: 90...5770 mm,UM = 4; 5; 6: 190...5770 mm |
| Length [l] |
UM = 0: 312...6000 mm (l is rounded in accordance with the toothed belt pitch l - l1 ≥ 222 mm),UM = 1; 2; 3: 410...6000 mm (l is rounded in accordance with the toothed belt pitch l - l1 ≥ 222 mm),UM = 4; 5; 6: 510...6000 mm (l is rounded in accordance with the toothed belt pitch l - l1 ≥ 222 mm) |
| Length max [l max] |
6000mm |
| Length min [L min] |
312mm |
| Material information |
Glide profile: PA,Guide profile: PA,Section profile: Aluminum, natural; anodized |
| Nominal speed [vN] |
0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min |
| Preferred values |
160,240,320,400,480,640,800,1040,1200 |
| Recommended accessories |
Connection kit,Leg sets ST 2/... |
| Return unit [UM] |
0 = Beidseitig kleiner Umlenkkopf,1 = Einseitig großer Umlenkkopf in Fahrtrichtung am Beginn der Strecke ohne Antriebswelle,2 = Einseitig großer Umlenkkopf in Fahrtrichtung am Beginn der Strecke mit Anbindung an KE 2/O,3 = Einseitig großer Umlenkkopf in Fahrtrichtung am Beginn der Strecke mit Anbindung an HQ 2/O,4 = Beidseitig großer Umlenkkopf ohne Antriebswelle,5 = Beidseitig großer Umlenkkopf mit Anbindung an KE 2/O,6 = Beidseitig großer Umlenkkopf mit Anbindung an HQ 2/O |
| Section load in accumulation operation |
60kg |
| Track width in direction of transport [b max] |
1200mm |
| Track width in direction of transport [b min] |
160mm |
| Weight |
0kg |
- The belt section is a conveyor section that is ready for operation with own drive for the transportation of workpiece pallets
- It is suitable for all installation situations in which the motor cannot be fitted to the end of the belt section
- The return units can be inserted at both ends of the belt section, allowing a greater variety of applications
- With 1 or 2 large return heads, the new modular unit BS 2/M-2 can now also be used to drive a KE 2/O or HQ 2/O
- In addition, there is the option of whether or not a hexagonal shaft is integrated
- Drive position freely selectable in longitudinal direction
- Suitable for mounting situations where large return heads or drive heads are required
- BS 2 is suitable and recommended for workpiece pallets WT 2 and WT 2/LS in the longitudinal conveyor
- Can be combined with WT 2, WT 2/E, WT 2/LS and WT 2/F with wear pad PA
- Special models on request
- - The belt section is a conveyor section that is ready for operation with own drive for the transportation of workpiece pallets
- - It is suitable for all installation situations in which the motor cannot be fitted to the end of the belt section
- - The return units can be inserted at both ends of the belt section, allowing a greater variety of applications
- - With 1 or 2 large return heads, the new modular unit BS 2/M-2 can now also be used to drive a KE 2/O or HQ 2/O
- - In addition, there is the option of whether or not a hexagonal shaft is integrated
- - Drive position freely selectable in longitudinal direction
- - Suitable for mounting situations where large return heads or drive heads are required
- - BS 2 is suitable and recommended for workpiece pallets WT 2 and WT 2/LS in the longitudinal conveyor
- - Can be combined with WT 2, WT 2/E, WT 2/LS and WT 2/F with wear pad PA
- - Special models on request
Belt section BS 2/M-2
Ready for operation conveyor section with own drive
The belt section is a conveyor section that is ready for operation with own drive for the transportation of workpiece pallets, It is suitable for all installation situations in which the motor cannot be fitted to the end of the belt section, The return units can be inserted at both ends of the belt section, allowing a greater variety of applications, With 1 or 2 large return heads, the new modular unit BS 2/M 2 can now also be used to drive a KE 2/O or HQ 2/O, In addition, there is the option of whether or not a hexagonal shaft is integrated, Drive position freely selectable in longitudinal direction, Suitable for mounting situations where large return heads or drive heads are required, BS 2 is suitable and recommended for workpiece pallets WT 2 and WT 2/LS in the longitudinal conveyor, Can be combined with WT 2, WT 2/E, WT 2/LS and WT 2/F with wear pad PA, Special models on request