Attributes

Delivery information	Fully assembled
Height	40mm
Length	105mm
Mass [m]	0.27kg
Material information	Housing: Plastic,Stop cam: Steel, hardened
Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min	40 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 15 m/min	26 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min	18 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min	80 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min	60 kg
Min. workpiece pallet weight m	1 kg
Opening/shutting times	l = Hose length,1 Close,2 Open at 4 bar
Operating temperature [T] max	+5 … +60 °C
Pneumatic circuit diagram	1 Not included in the scope of delivery
Pneumatic straight connection [Ø]	4mm
Recommended accessories	VE 2/RS Return Stop,Switch bracket for WT position inquiry,Position inquiry VE 2/D-80
Scope of delivery	Incl. fastening material for assembly on the conveyor section ST 2/...,Pneumatic elements
Weight	0.41kg
Width	84mm
Workpiece pallet weight [mG]	80kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Pneumatic stop gate
• Optimal damping for workpiece pallet total weights up to 80 kg
• Infinitely adjustable damping
• Can be combined with WT 2/E, WT 2 and WT 2/F
• The stop gate stops one or more accumulating workpiece pallets at the defined workpiece pallet stop surface
• When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped
• Mounted inside the tracks, directly on the conveyor section
• In case of installation of the stop gate VE 2/D-80 inside the HP 2/L positioning plate, the mounting option is to be checked by means of CAD (MTpro)
• 1 - Pneumatic stop gate
• 2 - Optimal damping for workpiece pallet total weights up to 80 kg
• 3 - Infinitely adjustable damping
• 4 - Can be combined with WT 2/E, WT 2 and WT 2/F
• 5 - The stop gate stops one or more accumulating workpiece pallets at the defined workpiece pallet stop surface
• 6 - When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped
• 7 - Mounted inside the tracks, directly on the conveyor section
• 8 - In case of installation of the stop gate VE 2/D-80 inside the HP 2/L positioning plate, the mounting option is to be checked by means of CAD (MTpro)

VE 2/D-80 stop gate
Dampened stopping of the first accumulating workpiece pallet
Can be combined with WT 2/E, WT 2 and WT 2/F, Pneumatic stop gate, Infinitely adjustable damping, Optimal damping for workpiece pallet total weights up to 80 kg

• 3D CAD
• Data Sheet