Attributes

Cycle Time	3s
ESD	Yes
Gross weight	0.99kg
Material information	Housing: Aluminum, hard anodized,Stop: Steel, hardened
Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min	60 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 15 m/min	55 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min	50 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min	100 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min	70 kg
Min. workpiece pallet weight m	6 kg
Net weight	0.99kg
Operating temperature [T] max	+5 ... +60 °C
Required accessories	Actuator and sensor system cables common in the market (5-pole)
Weight	0.99kg
Workpiece pallet weight [mG]	100

• To the workpiece pallet separation in sections
• Dampened stop gate
• Can be combined with WT 2, WT 2/E, WT 2/F, WT 2/LS
• Can be combined with all TS 2plus components (except for HD components)
• Air damping adjustable by means of throttle screw
• Damping effect adjustable on the upper surface
• If the damping is set, weights of ± 50% of the set weight can be properly damped
• Loading only in the direction of transport
• No spring return, the stop blade of the stop gate is reset or put up by means of a step motor
• Electrical stop gate for the set-up of plants without pneumatic system
• Little installation work as there is no pneumatic system
• Low noise development
• Notice: A workpiece pallet may only hit the stop if the latter is completely in its top position
• 1 - To the workpiece pallet separation in sections
• 2 - Dampened stop gate
• 3 - Can be combined with WT 2, WT 2/E, WT 2/F, WT 2/LS
• 4 - Can be combined with all TS 2plus components (except for HD components)
• 5 - Air damping adjustable by means of throttle screw
• 6 - Damping effect adjustable on the upper surface
• 7 - If the damping is set, weights of ± 50% of the set weight can be properly damped
• 8 - Loading only in the direction of transport
• 9 - No spring return, the stop blade of the stop gate is reset or put up by means of a step motor
• 10 - Electrical stop gate for the set-up of plants without pneumatic system
• 11 - Little installation work as there is no pneumatic system
• 12 - Low noise development
• 13 - Notice: A workpiece pallet may only hit the stop if the latter is completely in its top position

Stop gate VE 2/D100-E
To the workpiece pallet separation in sections, Dampened stop gate, Can be combined with WT 2/E, WT 2 and WT 2/F, Can be combined with all TS 2plus components (except for HD components)

• 3D CAD
• Data Sheet