Attributes
| Delivery information |
Not assembled |
| Gross weight |
0.153kg |
| Height |
86mm |
| Length |
65mm |
| Material |
Steel/PA 66 |
| Net weight |
0.153kg |
| Required accessories |
Sensor M12x1, S<sub>N</sub> = 8 mm, L ≥ 44 mm can be installed flush or not flush |
| Scope of delivery |
Incl. fastening material |
| Weight |
0.16kg |
| Width |
35mm |
- For fastening a sensor and attaching to the belt end of a conveyor section
- Suitable for querying the workpiece pallet position
- The switch bracket is not traversable
- Simple, fast mounting and replacement of the sensor without adjustment through flush installation with defined sensing range
- Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
- Changing the sensor is quick and easy by loosening a separate clamping screw. The switch bracket stays in position
- The short length of the switch bracket enables recognition of the operating status of the sensor
- The switch bracket is not suitable for node control on HQs and EQs
- - For fastening a sensor and attaching to the belt end of a conveyor section
- - Suitable for querying the workpiece pallet position
- - The switch bracket is not traversable
- - Simple, fast mounting and replacement of the sensor without adjustment through flush installation with defined sensing range
- - Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
- - Changing the sensor is quick and easy by loosening a separate clamping screw. The switch bracket stays in position
- - The short length of the switch bracket enables recognition of the operating status of the sensor
- - The switch bracket is not suitable for node control on HQs and EQs
SH 2/EP switch bracket
For fastening a sensor and attaching to the belt end of a conveyor section, Suitable for querying the workpiece pallet position, The switch bracket is not traversable, Simple, fast mounting and replacement of the sensor without adjustment through flush installation with defined sensing range, Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/… H section with a profile width of 50 mm, Changing the sensor is quick and easy by loosening a separate clamping screw. The switch bracket stays in position, The short length of the switch bracket enables recognition of the operating status of the sensor, The switch bracket is not suitable for node control on HQs and EQs