Attributes

Delivery information	Fully assembled
Force F	160N
Force F1	1290N
Force F2	645N
Gross weight	4kg
Height	152mm
Length	254mm
Magnetic field strength	3,0 ... 1400,0
Mass [m]	2.65kg
Material information	Cover: Thermoplastic film,Lubricating felt: SAE F1,Magnets: Neodymium,Guide roller: POM,Spacer: Chloroprene rubber (CR),Protective plate: Polycarbonate (PC) + steel,Base body: Aluminum, anodized
Net weight	4kg
Notice	The min. distance between two workpiece pallets depends on the workpiece pallet version and is measured from the center of one workpiece pallet to the center of the other workpiece pallet,Orientation information, values depend on application,Max. speed values are orientation information and depend on the respective application,Positioning accuracy values are orientation information and depend on the respective application
Output	275W
Positioning accuracy	0.05mm
Recommended accessories	Data carrier,Felt lubrication: ISO VG 46 food-grade lubricant
Scope of delivery	Protective plate to shield magnetic field when workpiece pallet is removed
Speed	150m/min
Weight	4kg
Width	254mm
Workpiece pallet weight [mG]	12.65kg

• Available in two versions: – 2 magnet plates (≤ 2 kg load) – 3 magnet plates (≤ 10 kg load)
• Protective plate to shield magnetic field
• Low-wear, quiet and low-vibration plastic guide rollers
• Low-maintenance and long-lasting thanks to lubricating felt to evenly lubricate guide rails/rollers
• Variable load centers of gravity thanks to guide rollers
• Open accessibility to workpiece pallets from five sides
• Identification systems supported
• 1 - Available in two versions: – 2 magnet plates (≤ 2 kg load) – 3 magnet plates (≤ 10 kg load)
• 2 - Protective plate to shield magnetic field
• 3 - Low-wear, quiet and low-vibration plastic guide rollers
• 4 - Low-maintenance and long-lasting thanks to lubricating felt to evenly lubricate guide rails/rollers
• 5 - Variable load centers of gravity thanks to guide rollers
• 6 - Open accessibility to workpiece pallets from five sides
• 7 - Identification systems supported

Workpiece pallet with 3 magnets
Low maintenance and long lasting thanks to lubricating felt to evenly lubricate guide rails/rollers, Variable load centers of gravity thanks to guide rollers, Available in two versions:
– 2 magnet plates (≤ 2 kg load)
– 3 magnet plates (≤ 10 kg load), Pro

• 3D CAD
• Data Sheet

Recommended accessories

Data carrier

Felt lubrication: ISO VG 46 food-grade lubricant

Condition of Delivery

Fully assembled

Scope of delivery

Protective plate to shield magnetic field when workpiece pallet is removed

The workpiece pallet ensures low-friction transport and precise product positioning. The bores and recesses allow your carrying plate (up to 500 mm) to be attached.

The workpiece pallet can support a data carrier (infrared). The data on the data carrier can be read at full speed and acceleration as the workpiece pallet passes through the reading station.

			3842559433	3842559434
Mass		kg	2.18	2.65
Material			Cover: thermoplastic film Lubricating felt: SAE F-1 Magnets: neodymium Guide roller: POM Spacer: chloroprene rubber (CR) Protective plate: polycarbonate (PC) + steel Base body: anodized aluminum
Total workpiece pallet weight		kg	4.18	12.65
Magnetic field strength		Gs	2,5 ... 268,0	3,0 ... 1400,0
Max. acceleration 1)	Section module, 1 kg load	m/s²	40
	Section module, 10 kg load	m/s²		10
	Curve module, 1 kg load	m/s²	20
Max. speed 1)	Section module	m/min	150
	Curve module	m/min	150
Max. acceleration force	Motor	N	120	160
Magnetic force	Section module	N	860	1290
	Curve module	N	430	645
Max. input power		W	275
Positioning accuracy 1)	Section module, (X-axis)	mm	0.05
Repeat accuracy of single workpiece pallet 1)	Section module, (X-axis)	mm	±0,01
	Section module, (Y-axis)	mm	±0,015
	Section module, (Z-axis)	mm	±0,025
	Curve module, (X-/Y-/Z-axis)	mm	±0,025
Min. distance between two workpiece pallets 2)	Section module with spacer	mm	167	200
	Section module without spacer	mm	154	200
	Curve module	mm	200

1)	Orientation information, values depend on application
2)	The min. distance between two workpiece pallets depends on the workpiece pallet version and is measured from the center of one workpiece pallet to the center of the other workpiece pallet