Attributes

Delivery information	Fully assembled
Gross weight	4.2kg
Height	118mm
Length	164mm
Mass [m]	15kg
Material information	Housing: Aluminum, hard anodized,Latch: Steel
Net weight	4.2kg
Operating temperature [T] max	+60 °C
Pneumatic straight connection [Ø]	6mm
Recommended accessories	M12x1 sensor with rated sensing range S<sub>N</sub> = 4 mm, overall length 45 mm,Clamping Holder
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section,Right-angle connector for the air connections in Quickfix design,Position sensor
Track width in the longitudinal conveyor [bL]	320mm
Weight	4.2kg
Width	181mm
Workpiece pallet weight [mG]	130kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Slide stop; can be lowered pneumatically, dampened stop
• Stopping on the outside of the frame module
• Can be used in reversible operation
• Design permits installation with a section gap from a = 90 mm when space is limited
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• 4 positions, can be moved to pneumatically: – Upper, lower position and latch in the extended and retracted state
• 3 positions can be detected: top, bottom and extended stop rail, can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F-H
• Additional possibilities for installing sensors, advantageous in restricted conditions
• Can be combined with WT 2 and WT 2/F
• Notice: Combination with WT 2/LS not possible
• 1 - Slide stop; can be lowered pneumatically, dampened stop
• 2 - Stopping on the outside of the frame module
• 3 - Can be used in reversible operation
• 4 - Design permits installation with a section gap from a = 90 mm when space is limited
• 5 - Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• 6 - 4 positions, can be moved to pneumatically: – Upper, lower position and latch in the extended and retracted state
• 7 - 3 positions can be detected: top, bottom and extended stop rail, can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F-H
• 8 - Additional possibilities for installing sensors, advantageous in restricted conditions
• 9 - Can be combined with WT 2 and WT 2/F
• 10 - Notice: Combination with WT 2/LS not possible

VA 2/D-130 Slide Stop
Can be combined with WT 2 and WT 2/F, Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/… H section with a profile width of 50 mm, Slide stop; can be lowered pneumatically, dampened stop, Stopping on the outside of the fr

• 3D CAD
• Data Sheet