Attributes

Delivery information	Not assembled
ESD	yes
Height	50mm
Length	105mm
Material information	Housing: Aluminum, hard anodized,Stop: Steel, hardened
Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min	35 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min	30 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 24 m/min	24 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 30 m/min	18 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 36 m/min	10 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min	60 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min	40 kg
Min. workpiece pallet weight m	1 kg
Nominal speed [vN]	6 m/min,9 m/min,12 m/min,15 m/min,18 m/min,24 m/min,30 m/min,36 m/min
Notice	High-temperature damper on request
Operating temperature [T] max	+5 ... +60 °C
Pneumatic circuit diagram	1 Not included in the scope of delivery
Pneumatic straight connection [Ø]	4mm
Scope of delivery	Incl. fastening material for mounting on an ST 2/… or BS 2/... or EQ 2/... or HQ 2/U, HQ 2/T, HQ 2/S, HQ 2/O,DA 2/60 damper with two different stops to optionally use for infeeding or outfeeding
Weight	0.66kg
Width	95mm
Workpiece pallet weight [mG]	60403530241810

• For permitted total weight of workpiece pallets up to 60 kg
• Pneumatic damper
• Infinitely adjustable
• Optimal damping at a ratio of 2:1 between heavy and light workpiece pallets
• Can be combined with WT 2/E, WT 2, WT 2/F, WT 2/H, WT 2/F-H and WT 2/LS
• Installation location: ST 2/... section, BS 2/... belt section and HQ 2... lift transverse unit
• Not suitable for HQ 2/U2 and HQ 2/..-H
• The damper cushions the impact of the arriving workpiece pallets when they are moved from a transverse section into a longitudinal section and vice versa
• The pneumatic return occurs as the stop gate opens, which permits the workpiece pallet to move toward the damper
• 1 - For permitted total weight of workpiece pallets up to 60 kg
• 2 - Pneumatic damper
• 3 - Infinitely adjustable
• 4 - Optimal damping at a ratio of 2:1 between heavy and light workpiece pallets
• 5 - Can be combined with WT 2/E, WT 2, WT 2/F, WT 2/H, WT 2/F-H and WT 2/LS
• 6 - Installation location: ST 2/... section, BS 2/... belt section and HQ 2... lift transverse unit
• 7 - Not suitable for HQ 2/U2 and HQ 2/..-H
• 8 - The damper cushions the impact of the arriving workpiece pallets when they are moved from a transverse section into a longitudinal section and vice versa
• 9 - The pneumatic return occurs as the stop gate opens, which permits the workpiece pallet to move toward the damper

DA 2/60 damper
Pneumatic damper, Can be combined with WT 2/E, WT 2, WT 2/F, WT 2/H and WT 2/F H, Infinitely adjustable, Optimal damping at a ratio of 2:1 between heavy and light workpiece pallets, Installation location: ST 2/... section, BS 2/... belt section and HQ 2..

• 3D CAD
• Data Sheet

Condition of Delivery

Not assembled

Scope of delivery

Incl. fastening material for mounting on an ST 2/… or BS 2/... or EQ 2/... or HQ 2/U, HQ 2/T, HQ 2/S, HQ 2/O

DA 2/60 damper with two different stops to optionally use for infeeding or outfeeding

DA 2/... ‒ HQ 2/...

*) = Stroke of damper
**) = Lift HQ 2/…
***) = Center HQ 2/…

DA 2/... ‒ SP 2/...

*) = stroke of damper
**) = stroke of WT 2

The damper cushions the impact of workpiece pallets when they are moved from a transverse section into a longitudinal section and vice versa. The pneumatic return occurs in parallel to the opening of the stop gate, which permits the workpiece pallet to move toward the damper.

1)	Not included in the scope of delivery

No.			3842557983
Max. total weight of workpiece pallet	mG	kg	60
Max. operating temperature 1)	T	°C	0 ... +60
Material entry			Housing: Aluminum, hard anodized Stop: Steel, hardened
Mass	m	kg	1
Pneumatic push-in fitting	Ø	mm	4

1)	High-temperature damper on request

Permissible accumulation load

mG	vN
kg	m/min
60 40 35 30 24 18 10	6 9 12 18 24 30 36