Attributes

Delivery information	Not assembled
Gross weight	318g
Material information	Housing: Aluminum, hard anodized,Stop cam: Steel, hardened
Min. workpiece pallet weight m	3 kg
Notice	High-temperature stop gate on request
Operating temperature [T] max	+5 ... +60 °C
Weight	0.32kg
Workpiece pallet weight [mG]	250kg

• Spring-loaded safety catch
• Can be used on the left or right
• Easy fastening in the groove of the ST 2/… or BS 2/… section profile
• Pneumatic version, including pneumatic cylinder to open the safety catch. Necessary for reversible operation
• Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F-H
• The return stop VE 2/RS-H can be installed on the WT 2 and WT 2/F-H without spacer
• The return stop prevents the rebound impact of the workpiece pallet from the stop gate VE 2/D-... or damper DA 2/...
• Combination with WT 2/LS not possible
• The use of the VE 2/RS-H is especially recommended for high total weights and low damping
• In normal condition, the stop gate is moved into the lock position by a spring and the workpiece pallet overtravels the VE 2/RS-H in the direction of transport and is stopped against the direction of transport
• Mounted inside the tracks, directly on the conveyor section
• 1 - Spring-loaded safety catch
• 2 - Can be used on the left or right
• 3 - Easy fastening in the groove of the ST 2/… or BS 2/… section profile
• 4 - Pneumatic version, including pneumatic cylinder to open the safety catch. Necessary for reversible operation
• 5 - Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F-H
• 6 - The return stop VE 2/RS-H can be installed on the WT 2 and WT 2/F-H without spacer
• 7 - The return stop prevents the rebound impact of the workpiece pallet from the stop gate VE 2/D-... or damper DA 2/...
• 8 - Combination with WT 2/LS not possible
• 9 - The use of the VE 2/RS-H is especially recommended for high total weights and low damping
• 10 - In normal condition, the stop gate is moved into the lock position by a spring and the workpiece pallet overtravels the VE 2/RS-H in the direction of transport and is stopped against the direction of transport
• 11 - Mounted inside the tracks, directly on the conveyor section

VE 2/RS-H return stop, pneumatic
Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F H, Spring loaded safety catch, Can be used on the left or right, Easy fastening in the groove of the ST 2/… or BS 2/… section profile, Pneumatic version, including pneumatic cylinder to open the safety

• 3D CAD
• Data Sheet

Condition of Delivery

Not assembled

VE 2/RS-H return stop, pneumatic

VE 2/RS-H Return Stop

Note: The VE 2/RS-H return stop can only be installed on the WT 2 and WT 2/F without spacers.

Note: Reversible operation is only possible with the pneumatic version.

The return stop prevents the workpiece pallet from rebounding off the VE 2/D-... stop gate or the DA 2/... damper
Using the VE 2/RS-H is particularly advisable for high overall weights and low damping. In normal condition, the stop gate is moved into the lock position by a spring and the workpiece pallet runs over the VE 2/RS-H in the direction of transport and is stopped against the direction of transport. Mounted inside the tracks, directly on the conveyor section.

No.			3842549696	3842549698
Max. total weight of workpiece pallet	mG	kg	250 kg	250 kg
Workpiece pallet minimum weight	m	kg	3 kg	3 kg
Operating temperature 1)	T	°C	0 ... +60	0 ... +60
Material specification			Housing: Aluminum, hard anodized Lug cam: Steel, hardened	Housing: Aluminum, hard anodized Lug cam: Steel, hardened

1)	High-temperature stop gate on request