Attributes

Delivery information	Not assembled
ESD	yes
Height	68mm
Length	155.5mm
Material information	Housing: Aluminum, hard anodized,Stop: Steel, hardened
Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min	100 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 15 m/min	95 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min	55 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min	100 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min	100 kg
Min. workpiece pallet weight m	5 kg
Nominal speed [vN]	6 m/min,9 m/min,12 m/min,15 m/min,18 m/min
Notice	High-temperature damper on request
Operating temperature [T] max	0 ... +60 °C
Pneumatic straight connection [Ø]	6mm
Scope of delivery	Incl. fastening material,Damper DA 2/100-E for the outfeeding of workpiece pallets WT 2, WT 2/F, WT 2/H or WT 2/F-H via an HQ 2/U-H or HQ 2/C-H
Weight	2.1kg
Width	138mm
Workpiece pallet weight [mG]	1001001009555

• For permitted total weight of workpiece pallets up to 100 kg
• Pneumatic damper
• Infinitely adjustable
• Optimal damping at a ratio of 2:1 between heavy and light workpiece pallets
• Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F-H
• Installation location: HQ 2/U-H or HQ 2/C-H lift transverse unit
• The damper cushions the impact of the arriving workpiece pallet
• The DA 2/100-E is suitable for outfeeding via an HQ 2/U-H
• The pneumatic return occurs as the stop gate opens, which permits the workpiece pallet to move toward the damper
• The damper is traversable
• 1 - For permitted total weight of workpiece pallets up to 100 kg
• 2 - Pneumatic damper
• 3 - Infinitely adjustable
• 4 - Optimal damping at a ratio of 2:1 between heavy and light workpiece pallets
• 5 - Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F-H
• 6 - Installation location: HQ 2/U-H or HQ 2/C-H lift transverse unit
• 7 - The damper cushions the impact of the arriving workpiece pallet
• 8 - The DA 2/100-E is suitable for outfeeding via an HQ 2/U-H
• 9 - The pneumatic return occurs as the stop gate opens, which permits the workpiece pallet to move toward the damper
• 10 - The damper is traversable

DA 2/100-E Damper
Pneumatic damper, Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F H, Infinitely adjustable, Optimal damping at a ratio of 2:1 between heavy and light workpiece pallets, For permitted total weight of workpiece pallets up to 100 kg, Installation locati

• 3D CAD
• Data Sheet

Condition of Delivery

Not assembled

Scope of delivery

Incl. fastening material

Damper DA 2/100-E for the outfeeding of workpiece pallets WT 2, WT 2/F, WT 2/H or WT 2/F-H via an HQ 2/U-H or HQ 2/C-H

DA 2/100-E Damper

DA 2/… dampers are used to cushion the impact of workpiece pallets when they are moved from a transverse section into a longitudinal section or vice versa.

The damper damps the impact of the arriving workpiece pallet. The DA 2/100-E is suitable for discharging via an HQ 2/U-H. The pneumatic return occurs in parallel to the opening of the stop gate, which permits the workpiece pallet to move toward the damper. The damper is traversable.

1)	Not included in the scope of delivery

No.			3842548585
Max. total weight of workpiece pallet	mG	kg	100
Max. operating temperature 1)	T	°C	0 ... +60
Material entry			Housing: Aluminum, hard anodized Stop: Steel, hardened
Mass	m	kg	5
Pneumatic push-in fitting	Ø	mm	6

1)	High-temperature damper on request

Permissible accumulation load

mG	vN
kg	m/min
100 100 100 95 55	6 9 12 15 18

Compressed air consumption of TS 2plus units