Attributes

Delivery information	Fully assembled
Height	100mm
Length	90mm
Material information	Housing: Aluminum, hard anodized,Stop cam: Steel, hardened
Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min	220 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 15 m/min	140 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min	100 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min	450 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min	300 kg
Notice	High-temperature stop gate on request
Opening/shutting times	l = Hose length,1 Close,2 Open at 4 bar
Operating temperature [T] max	+5 ... +60 °C
Pneumatic circuit diagram	1 Not included in the scope of delivery
Pneumatic straight connection [Ø]	6mm
Recommended accessories	VE 2/RS Return Stop,Switch bracket SH 2/...
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section
Weight	1.57kg
Width	50mm
Workpiece pallet weight [mG]	450kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Pneumatic stop gate
• For high permitted total weight of the workpiece pallet up to 450 kg
• Can be combined with WT 2 and WT 2/F
• Combination with WT 2/LS not possible
• Stops one or more accumulating workpiece pallets at the defined stop surface
• When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped
• Mounted inside the tracks, directly on the conveyor section
• 1 - Pneumatic stop gate
• 2 - For high permitted total weight of the workpiece pallet up to 450 kg
• 3 - Can be combined with WT 2 and WT 2/F
• 4 - Combination with WT 2/LS not possible
• 5 - Stops one or more accumulating workpiece pallets at the defined stop surface
• 6 - When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped
• 7 - Mounted inside the tracks, directly on the conveyor section

VE 2/X Stop Gate
Can be combined with WT 2 and WT 2/F, Pneumatic stop gate, For high permitted total weight of the workpiece pallet up to 450 kg

• 3D CAD
• Data Sheet

VE 2/RS Return Stop

VE 2/RS Return Stop

Spring-loaded safety catch Can be used on the left or right

Assembly instructions

CAD data

Switch Bracket SH 2/S

Switch Bracket SH 2/S

For fastening a sensor Suitable for lateral sensing of the workpiece pallet position

CAD data

Condition of Delivery

Fully assembled

Scope of delivery

Incl. all fastening material to mount on ST 2/... conveyor section

Opening and shutting times

L = Hose length
1 Close
2 Open 4 bar

VE 2/X Stop Gate

Stops one or more accumulating workpiece pallets at the defined stop surface of the workpiece pallet. When the pressure is released, the stop gate is closed by a spring and the workpiece pallet is stopped. Mounted inside the tracks, directly on the conveyor section.

1)	Not included in the scope of delivery

No.			3842547770
Max. total weight of workpiece pallet	mG	kg	450 kg
Operating temperature 1)	T	°C	0 ... +60
Material specification			Housing: Aluminum, hard anodized Lug cam: Steel, hardened
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	6 mm

1)	High-temperature stop gate on request

Permissible accumulation load

mG	vN
kg	m/min
450 300 220 140 100	6 9 12 15 18

Compressed air consumption of TS 2plus units