BASE UNIT 65+ STS DIRECT
| Actual chain length | 2x 0,2 |
| Delivery information | Fully assembled,Connector, chain guard enclosed |
| Effective sliding rail length | 881m |
| Height | 334.4mm |
| Length | 393.5mm |
| Material information | Chain wheel: PA,Chain guide: PA,Ball bearing: Non-rusting steel 1.4301/FDA,Housing: Non-rusting steel 1.4301,Connector: Non-rusting steel 1.4301,Hexagonal shaft up to size 160: PA, from size 160: Non-rusting steel 1.4301 + PA |
| Modification | Additional versions are available on request from our modification department. ([email protected]) |
| Recommended accessories | Active or passive bridge connection kits,Synchronous drive connection kit |
| Required accessories | Drive kit,Slide rail: Length calculation |
| Scope of delivery | Incl. fastening material |
| Size [b] | 65 |
| Weight | 4.79kg |
| Width | 81.8mm |
- Reduced noise emission due to slide rails guided in the head drive
- Installation of the drive kit possible on the right/left (motor, coupling, flange)
- Drive of a parallel conveyor section or bridge using a hexagonal hollow shaft integrated as standard
- Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- Side elements with mounting option for attaching holders for lateral guides, or similar
- 1 - Reduced noise emission due to slide rails guided in the head drive
- 2 - Installation of the drive kit possible on the right/left (motor, coupling, flange)
- 3 - Drive of a parallel conveyor section or bridge using a hexagonal hollow shaft integrated as standard
- 4 - Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- 5 - Side elements with mounting option for attaching holders for lateral guides, or similar
Ball bearing made of non rusting steel (1.4301), with seal on both sides and FDA compliant grease filling, Reduced noise emission due to slide rails guided in the head drive, Installation of the drive kit possible on the right/left (motor, coupling, flang
Slide rail
Slide rail
Easy assembly - simply clip onto the section profile Secured against axial shifting due to lateral boltingCAD data
Drive kit
Drive kit
CAD data
Connection kit active bridge, connection kit passive bridge
Connection kit active bridge, connection kit passive bridge
CAD data
Connection kit synchronous drive
external motor/internal motor
Connection kit synchronous drive
external motor/internal motor
CAD data
Head drive STS GM = 2
Head drive STS GM = 0
Base unit STS
Drive kit VFplus (installation in the AL system)
Drive kit VFplus (installation in the STS system)
Head drive AL GM = 0
Head drive AL GM = 2
Note: High-pressure cleaning of the ball bearings is not permitted.
The basic unit is quickly turned into a head drive with variable mounting position by adding a drive kit.
With the double-sided hexagonal hollow shaft, other components can be easily driven using a transmission (active bridge).
Size: all track widths Suitable chain types: all Permissible chain tensile force: Fmax = 1250 N Section length: L ≤ 30 m Conveying speed: vN = 2-60 m/min, other speeds available on request Chain bag to compensate for chain elongation during service life Not suitable for reversible operationChain sprocket
Innovative drive concept
Conveyor noise level
Combination matrix
|
Straight |
Curves |
Drives |
Return Unit |
|||||||||
|
Section profile STS open |
Section profile STS Clean |
Assembly module |
Curve wheel |
Roller curve* |
Vertical curve |
Head drive |
Connection drive |
Center drive** |
Basic unit |
90° ** |
||
|
Straight |
Section profile STS open |
J |
||||||||||
|
Section profile STS Clean |
L6) |
L6) |
||||||||||
|
Assembly module |
J |
L6) |
N |
|||||||||
|
Curves |
Curve wheel |
J |
L6) |
J |
L2, 7) |
|||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
|||||||
|
Vertical curve |
J |
L6) |
J |
L1) |
L1) |
L1) |
||||||
|
Drives |
Head drive |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
N |
||||
|
Connection drive |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
||||
|
Center drive** |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
N |
|||
|
Return Unit |
Basic unit |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
L1) |
L1) |
L1, 3) |
L1, 3) |
|
|
90° ** |
J |
L6) |
J |
L1) |
N |
L1) |
L1) |
L1) |
N |
N |
L1) |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
||||||||||
|
N |
not possible |
|||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 224 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
| 6) | Replace the standard profile connector with STS Clean Section profile connector |
| 7) | Directly possible with left-right change (one profile connector is no longer required) |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.