BASE UNIT 65+ AL CURVE WHEEL
| Actual chain length | 68m |
| Deflection angle [α] | 180° |
| Delivery information | Not assembled |
| Effective sliding rail length | 82m |
| Height | 79.5mm |
| Length | 368.5mm |
| Material information | Housing: Diecast aluminum,Chain wheel: PA, white,Ball bearing: Non-rusting steel 1.4301/FDA |
| Modification | Additional versions are available on request from our modification department. ([email protected]) |
| Recommended accessories | Connection kit alpine conveyor |
| Required accessories | Drive kit curve wheel,Assembly module,Slide rail: Length calculation,Leg set |
| Scope of delivery | Incl. fastening material |
| Size [b] | 65 |
| Weight | 5.6kg |
| Width | 371mm |
- Basic unit curve wheel drive AF + drive kit curve wheel drive = curve wheel drive
- Driving several superimposed basic curve wheel units (alpine conveyor) is easily implemented via the integrated hexagonal hollow shafts
- Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- Side elements with slot to attach holders for lateral guides, or similar
- 1 - Basic unit curve wheel drive AF + drive kit curve wheel drive = curve wheel drive
- 2 - Driving several superimposed basic curve wheel units (alpine conveyor) is easily implemented via the integrated hexagonal hollow shafts
- 3 - Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- 4 - Side elements with slot to attach holders for lateral guides, or similar
Ball bearing made of non rusting steel (1.4301), with seal on both sides and FDA compliant grease filling, Side elements with slot to attach holders for lateral guides, or similar, Basic unit curve wheel drive AF + drive kit curve wheel drive = curve whee
Slide rail
Slide rail
Easy assembly - simply clip onto the section profile Secured against axial shifting due to lateral boltingCAD data
Assembly module AL
Assembly module AL
Assembly instructions
CAD data
Drive kit curve wheel AL
Drive kit curve wheel AL
The transmission of force of several superimposed curve wheels is possible. The motor torque then has to be distributed across all curve wheel levels. The adjustable ball catch coupling is protected and integrated in the flange to save spaceCAD data
Connection kit alpine conveyor
Connection kit alpine conveyor
With the alpine conveyor connection kit, an alpine conveyor can be easily assembled in sizes 65 mm or 90 mm by combining multiple aluminum curve wheels.CAD data
Curve wheel drive support
Curve wheel drive support
CAD data
Base unit curve wheel AL
Curve wheel drive AL GM = 2
Curve wheel drive AL GM = 0
The curve wheel drive is used for driving the conveyor chain in circuit systems with a top-running chain. Combining the base unit curve wheel 180° AL with the appropriate drive kit quickly turns it into a curve wheel drive.
Size: 65 and 90 Suitable chain types: all Permissible chain tensile force: Fmax = 400 N per level, section length for closed circuits: L ≤ 10 m Permissible torque: Mmax = 60 NmWhen combining several curve wheel base units, the motor torque must be distributed across the individual levels
Conveying speed: vN = 4-21 m/minFor drives with frequency converters (FU), the speed is to be limited to a maximum of 21 m/min by a control system
Recommendation: no accumulation operation until 1000 mm after the curve wheel drive Can only be used with a closed profileInnovative drive concept
Conveyor noise level
Combination matrix
|
Straight |
Curves |
Drives |
Return Unit |
||||||||||||
|
Section profile AL open |
Section profile AL closed |
Assembly module |
Curve wheel |
Roller curve* |
Horizontal sliding curve |
Vertical curve |
Head drive |
Curve wheel drive |
Connection drive |
Center drive (STS)** |
Basic unit |
90° (STS)** |
Transmission kit |
||
|
Straight |
Section profile AL open |
J |
|||||||||||||
|
Section profile AL closed |
J |
J |
|||||||||||||
|
Assembly module |
J |
J |
N |
||||||||||||
|
Curves |
Curve wheel |
J |
J |
L2) |
L2) |
||||||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
||||||||||
|
Horizontal sliding curve |
J |
J |
J |
J |
N |
L1) |
|||||||||
|
Vertical curve |
J |
J |
J |
J |
L1) |
L1) |
L1) |
||||||||
|
Drives |
Head drive |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
N |
||||||
|
Curve wheel drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
||||||
|
Connection drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
N |
|||||
|
Center drive (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
N |
N |
||||
|
Return Unit |
Basic unit |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
L2) |
N |
N |
L2, 3) |
L2, 3) |
||
|
90° (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
L2, 5) |
N |
N |
L2) |
||
|
Transmission kit |
N |
N |
N |
N |
N |
N |
N |
J |
N |
J |
N |
J |
N |
N |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
|||||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
|||||||||||||
|
N |
not possible |
||||||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 120 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.