CURVE 160+ HOR STS 45°R500
| Actual chain length | 2x 0,59 |
| Deflection angle [α] | 45° |
| Delivery information | Fully assembled |
| Dimension A [mm] | 580.8 |
| Effective sliding rail length | 5x 0,59 |
| Height | 69mm |
| Length | 688mm |
| Material information | Profile: Non-rusting steel 1.4301,Roller carrier: PA 66,Ball bearing: Non-rusting steel 1.4301/FDA,Connector: Non-rusting steel 1.4301,Rollers: PA |
| Modification | Additional versions are available on request from our modification department. ([email protected]) |
| Required accessories | Slide rail: Length calculation |
| Scope of delivery | Incl. fastening material for mounting to the STS section profile |
| Size [b] | 160 |
| Weight | 3.98kg |
| Width | 411mm |
- Patented roller elements for low-friction, quieter changes in chain direction
- Easy-to-clean design
- Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- Surfaces in contact with chain made of FDA-compliant materials
- 1 - Patented roller elements for low-friction, quieter changes in chain direction
- 2 - Easy-to-clean design
- 3 - Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- 4 - Surfaces in contact with chain made of FDA-compliant materials
Ball bearing made of non rusting steel (1.4301), with seal on both sides and FDA compliant grease filling, Patented roller elements for low friction, quieter changes in chain direction, Surfaces in contact with chain made of FDA compliant materials, Easy
Slide rail
Slide rail
Easy assembly - simply clip onto the section profile Secured against axial shifting due to lateral boltingCAD data
Roller curve STS
Roller curve STS 30°
Roller curve STS 45°
Roller curve STS 90°
Roller curve STS 180°
|
b |
α |
A |
C |
|
mm |
° |
mm |
mm |
| 160 | 30 | 476.6 | 266.3 |
| 45 | 580.8 | 353.7 | |
| 90 | 680 | 680 | |
| 180 | 1160 | 680 | |
| 240 | 30 | 496.6 | 340.9 |
| 45 | 609.1 | 422 | |
| 90 | 720 | 720 | |
| 180 | 1240 | 720 | |
| 320 | 30 | 516.6 | 415.6 |
| 45 | 637.4 | 490.3 | |
| 90 | 760 | 760 | |
| 180 | 1320 | 760 |
Note: High-pressure cleaning of the ball bearings is not permitted.
The low-friction roller curve is used for the horizontal change in direction of the chain. Plastic-coated roller elements with ball bearings enable longer conveyor sections. The service life of the chain is increased and system costs are reduced.
Size: 160, 240, 320 Deflection angles Deflection radius: R500 Suitable chain types: all Version with open section profilesCombination matrix
|
Straight |
Curves |
Drives |
Return Unit |
|||||||||
|
Section profile STS open |
Section profile STS Clean |
Assembly module |
Curve wheel |
Roller curve* |
Vertical curve |
Head drive |
Connection drive |
Center drive** |
Basic unit |
90° ** |
||
|
Straight |
Section profile STS open |
J |
||||||||||
|
Section profile STS Clean |
L6) |
L6) |
||||||||||
|
Assembly module |
J |
L6) |
N |
|||||||||
|
Curves |
Curve wheel |
J |
L6) |
J |
L2, 7) |
|||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
|||||||
|
Vertical curve |
J |
L6) |
J |
L1) |
L1) |
L1) |
||||||
|
Drives |
Head drive |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
N |
||||
|
Connection drive |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
||||
|
Center drive** |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
N |
|||
|
Return Unit |
Basic unit |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
L1) |
L1) |
L1, 3) |
L1, 3) |
|
|
90° ** |
J |
L6) |
J |
L1) |
N |
L1) |
L1) |
L1) |
N |
N |
L1) |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
||||||||||
|
N |
not possible |
|||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 224 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
| 6) | Replace the standard profile connector with STS Clean Section profile connector |
| 7) | Directly possible with left-right change (one profile connector is no longer required) |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.