CURVE 90+ VERT AL 30°R500
| Actual chain length | 2x 0,46 |
| Deflection angle [α] | 30° |
| Delivery information | Fully assembled |
| Dimension A [mm] | 453.9 |
| Effective sliding rail length | 4x 0,46 |
| Height | 90mm |
| Length | 598mm |
| Material information | Profile: Aluminum, anodized,Profile connector: Steel, galvanized,Cross connector: Diecast aluminum,Support profile from size 160: Non-rusting steel 1.4301 |
| Modification | Additional versions are available on request from our modification department. ([email protected]) |
| Required accessories | Slide rail: Length calculation |
| Scope of delivery | Incl. fastening material for mounting to the AL section profile |
| Size [b] | 90 |
| Weight | 1.49kg |
| Width | 221mm |
- The vertical curve is used for the transition from a horizontal conveyor section to an ascending section and vice versa
- 1 - The vertical curve is used for the transition from a horizontal conveyor section to an ascending section and vice versa
The vertical curve is used for the transition from a horizontal conveyor section to an ascending section and vice versa
Slide rail
Slide rail
Easy assembly - simply clip onto the section profile Secured against axial shifting due to lateral boltingCAD data
Vertical curve AL
|
b |
α |
A |
C |
R |
|
mm |
° |
mm |
mm |
mm |
| 65 | 5 | 246.2 | 79.5 | 500 |
| 7.5 | 268.9 | 86 | 500 | |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 | |
| 45 | 548.7 | 276.1 | 500 | |
| 90 | 5 | 246.2 | 79.5 | 500 |
| 7.5 | 268.9 | 86 | 500 | |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 | |
| 45 | 548.7 | 276.1 | 500 | |
| 120 | 5 | 246.2 | 79.5 | 500 |
| 7.5 | 268.9 | 86 | 500 | |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 | |
| 45 | 548.7 | 276.1 | 500 | |
| 160 | 5 | 246.2 | 79.5 | 500 |
| 7.5 | 268.9 | 86 | 500 | |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 | |
| 45 | 548.7 | 276.1 | 500 | |
| 240 | 5 | 246.2 | 79.5 | 500 |
| 7.5 | 268.9 | 86 | 500 | |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 | |
| 320 | 5 | 246.2 | 79.5 | 500 |
| 7.5 | 268.9 | 86 | 500 | |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 |
Vertical curve AL 5°
Vertical curve AL 15°
Vertical curve AL 15°
Vertical curve AL 30°
Vertical curve AL 45°
The vertical curve is used for the transition from a horizontal conveyor section to an ascending section and vice versa. The chain tensile force is increased through the ensuing friction.
A vertical curve of 5° is recommended for the infeed and outfeed on the wedge conveyor, especially with small products.
Size: all Deflection angles and radii Suitable chain types: all Version with open section profiles Requires the use of the Advanced or Premium slide rails|
Material |
|
| Vertical curve AL VFplus 65 5° |
Profile: Aluminum, anodized Profile connector: Steel, galvanized Cross connector: Aluminum, die-cast |
| Vertical curve AL VFplus 65 7.5° | |
| Vertical curve AL VFplus 65 15° | |
| Vertical curve AL VFplus 65 30° | |
| Vertical curve AL VFplus 65 45° | |
| Vertical curve AL VFplus 90 5° | |
| Vertical curve AL VFplus 90 7.5° | |
| Vertical curve AL VFplus 90 15° | |
| Vertical curve AL VFplus 90 30° | |
| Vertical curve AL VFplus 90 45° | |
| Vertical curve AL VFplus 120 5° | |
| Vertical curve AL VFplus 120 7.5° | |
| Vertical curve AL VFplus 120 15° | |
| Vertical curve AL VFplus 120 30° | |
| Vertical curve AL VFplus 120 45° | |
| Vertical curve AL VFplus 160 5° |
Profile: Aluminum, anodized Profile connector: Steel, galvanized Cross connector: Aluminum, die-cast Support profile from size 160: stainless steel 1.4301 |
| Vertical curve AL VFplus 160 7.5° | |
| Vertical curve AL VFplus 160 15° | |
| Vertical curve AL VFplus 160 30° | |
| Vertical curve AL VFplus 160 45° | |
| Vertical curve AL VFplus 240 5° | |
| Vertical curve AL VFplus 240 7.5° | |
| Vertical curve AL VFplus 240 15° | |
| Vertical curve AL VFplus 240 30° | |
| Vertical curve AL VFplus 320 5° | |
| Vertical curve AL VFplus 320 7.5° | |
| Vertical curve AL VFplus 320 15° | |
| Vertical curve AL VFplus 320 30° |
Combination matrix
|
Straight |
Curves |
Drives |
Return Unit |
||||||||||||
|
Section profile AL open |
Section profile AL closed |
Assembly module |
Curve wheel |
Roller curve* |
Horizontal sliding curve |
Vertical curve |
Head drive |
Curve wheel drive |
Connection drive |
Center drive (STS)** |
Basic unit |
90° (STS)** |
Transmission kit |
||
|
Straight |
Section profile AL open |
J |
|||||||||||||
|
Section profile AL closed |
J |
J |
|||||||||||||
|
Assembly module |
J |
J |
N |
||||||||||||
|
Curves |
Curve wheel |
J |
J |
L2) |
L2) |
||||||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
||||||||||
|
Horizontal sliding curve |
J |
J |
J |
J |
N |
L1) |
|||||||||
|
Vertical curve |
J |
J |
J |
J |
L1) |
L1) |
L1) |
||||||||
|
Drives |
Head drive |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
N |
||||||
|
Curve wheel drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
||||||
|
Connection drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
N |
|||||
|
Center drive (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
N |
N |
||||
|
Return Unit |
Basic unit |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
L2) |
N |
N |
L2, 3) |
L2, 3) |
||
|
90° (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
L2, 5) |
N |
N |
L2) |
||
|
Transmission kit |
N |
N |
N |
N |
N |
N |
N |
J |
N |
J |
N |
J |
N |
N |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
|||||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
|||||||||||||
|
N |
not possible |
||||||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 120 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.