Attributes

Bending moment 1	50Nm
Diameter D	9.8mm
ESD	yes
Head shape	rectangular
Height	20mm
Length	46mm
Material	Steel, galvanized
Mounting orientation	0 °
Packaging unit	10
Profile slot	10
Profile slot P1/P2	10 / 10
Recommended accessories	Anti-torsion element,Radial compensation,Drilling jig,Cap
Weight	0.04kg
Width	10mm

• Quick connector 9.8 with smaller connector sleeve
• The hole for the connector sleeve does not make contact with the slot flanks. This allows a visually attractive connection; the slot can be completely closed with the cover profile
• 1 - Quick connector 9.8 with smaller connector sleeve
• 2 - The hole for the connector sleeve does not make contact with the slot flanks. This allows a visually attractive connection; the slot can be completely closed with the cover profile

Quick connector 0°, connector sleeve D = 9.8
Quick connector 9.8 with smaller connector sleeve, The hole for the connector sleeve does not make contact with the slot flanks. This allows a visually attractive connection; the slot can be completely closed with the cover profile

• 3D CAD
• Data Sheet

	Recommended accessories
	Anti-torsion element
	Radial compensation
	Drilling jig
	Cap

Radial compensation

Radial compensation

To avoid gaps and sharp edges on T-connections between two profiles using a central bolt or quick connector (note spacing of hole from the face of the profile) The slot segments can be broken out in order to fix surface elements in the slot Important note: the load carrying capacity of the profile connection is reduced when using radial compensation!

CAD data

Anti-torsion element

Anti-torsion element

Provides torsion resistance for profile connections with central bolts or quick connectors Subsequent installation in the connection possible

CAD data

Quick connector, 6 mm slot, 0°, 90° cover cap

Quick connector, 6 mm slot, 0°, 90° cover cap

For the right-angled connecting of two profiles Very good accessibility for tools during assembly  Quick connector for 6 mm slot with square head; can be used as a 0° or 90° connector Profile finishing: Blind hole DB8 or through-hole D8

CAD data

Quick connector, 8/10 mm slot, 0°

Quick connector, 10/10 mm slot, 0°, connector sleeve D = 9.8

Connection elements, selection criteria

Nut
8/8	500 N	40 Nm
8/10	2000 N	70 Nm
10/10	4000 N	140 Nm
10/10	800 N	50 Nm