Attributes
| Delivery information |
Not assembled |
| Gross weight |
0.112kg |
| Height |
33mm |
| Length |
55mm |
| Material |
Diecast aluminum |
| Net weight |
0.112kg |
| Required accessories |
Sensor M12, S<sub>N</sub> = 8 mm, L ≥ 44 mm can be installed flush or not flush |
| Scope of delivery |
Incl. fastening material |
| Weight |
0.12kg |
| Width |
35mm |
- For fastening a sensor and attaching to the inside groove of a conveyor section
- For sensing of the workpiece pallet position from below
- Especially sturdy metal design
- Able to bear loads of up to 100 kg
- Simple, fast mounting and replacement of the sensor without adjustment through flush installation with defined sensing range
- Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
- Changing the sensor is quick and easy by loosening a separate clamping screw. The switch bracket stays in position
- The short length of the switch bracket enables recognition of the operating status of the sensor
- The switch bracket can be used to fix a sensor M12x1 in place for lateral sensing of the workpiece pallet position
- - For fastening a sensor and attaching to the inside groove of a conveyor section
- - For sensing of the workpiece pallet position from below
- - Especially sturdy metal design
- - Able to bear loads of up to 100 kg
- - Simple, fast mounting and replacement of the sensor without adjustment through flush installation with defined sensing range
- - Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
- - Changing the sensor is quick and easy by loosening a separate clamping screw. The switch bracket stays in position
- - The short length of the switch bracket enables recognition of the operating status of the sensor
- - The switch bracket can be used to fix a sensor M12x1 in place for lateral sensing of the workpiece pallet position
SH 2/U-H switch bracket
For fastening a sensor and attaching to the inside groove of a conveyor section, For sensing of the workpiece pallet position from below, Especially sturdy metal design, Able to bear loads of up to 100 kg, Simple, fast mounting and replacement of the sensor without adjustment through flush installation with defined sensing range, Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/… H section with a profile width of 50 mm, Changing the sensor is quick and easy by loosening a separate clamping screw. The switch bracket stays in position, The short length of the switch bracket enables recognition of the operating status of the sensor, The switch bracket can be used to fix a sensor M12x1 in place for lateral sensing of the workpiece pallet position
Required accessories
Sensor M12, SN = 8 mm, L ≥ 44 mm
can be installed flush or not flush
|
CAD data
Condition of Delivery
Scope of delivery
SH 2/U-H switch bracket
The switch bracket can be used to fix an M12x1 sensor in place for sensing of the workpiece pallet position from below.
|
No.
|
|
|
3842537289
|
|
Material entry
|
|
|
Aluminum, die-cast
|