Attributes

A-rated emission sound pressure level [LPA]	<lt/> 60 dB(A)
Delivery information	Fully assembled
Height	50mm
Length	100mm
Material information	Housing: PA 6,Safety catch: Brass,Stop cam: PA 66
Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min	100 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 15 m/min	70 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min	50 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min	200 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min	140 kg
Notice	High-temperature stop gate on request
Opening/shutting times	l = Hose length,1 Close,2 Open at 4 bar
Operating temperature [T] max	+5 ... +60 °C
Pneumatic circuit diagram	1 Not included in the scope of delivery
Pneumatic straight connection [Ø]	4mm
Recommended accessories	VE 2/RS Return Stop,Switch bracket SH 2/...,Position sensor
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section,Pneumatic elements
Weight	0.35kg
Width	85mm
Workpiece pallet weight [mG]	200kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Pneumatic stop gate
• Media resistant
• Tilting stop gate; can be opened without causing abrasion on the workpiece pallet stop surface.
• Low-noise; especially quiet operation during opening and closing
• Reversible operation not permitted
• Can be combined with WT 2/E, WT 2, WT 2/F and WT 2/LS
• Stops one or more accumulating workpiece pallets at the defined stop surface
• When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped
• Mounted inside the tracks, directly on the conveyor section
• 1 - Pneumatic stop gate
• 2 - Media resistant
• 3 - Tilting stop gate; can be opened without causing abrasion on the workpiece pallet stop surface.
• 4 - Low-noise; especially quiet operation during opening and closing
• 5 - Reversible operation not permitted
• 6 - Can be combined with WT 2/E, WT 2, WT 2/F and WT 2/LS
• 7 - Stops one or more accumulating workpiece pallets at the defined stop surface
• 8 - When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped
• 9 - Mounted inside the tracks, directly on the conveyor section

VE 2/M Stop Gate
Tilting stop gate; can be opened without causing abrasion on the workpiece pallet stop surface., Reversible operation not permitted, , Pneumatic stop gate, Media resistant, Low noise; especially quiet operation during opening and closing

• 3D CAD
• Data Sheet

Switch Bracket

Switch Bracket

Stop gate position sensor

Stop gate position sensor

For retrofitting on the VE 2, VE 2/M, VE 2/L and VE 2/S stop gates Upper and lower position sensing possible, only suitable for upper position sensing with VE 2/S

CAD data

VE 2/RS Return Stop

VE 2/RS Return Stop

Spring-loaded safety catch Can be used on the left or right

Assembly instructions

CAD data

Condition of Delivery

Fully assembled

Scope of delivery

Incl. all fastening material to mount on ST 2/... conveyor section

Pneumatic elements

Opening and shutting times

L = Hose length
1 Close
2 Open 4 bar

Stops one or more accumulating workpiece pallets at the defined stop surface of the workpiece pallet. When the pressure is released, the stop gate is closed by a spring and the workpiece pallet is stopped. Mounted inside the tracks, directly on the conveyor section.

Circuit diagram

1 not included in the scope of delivery

No.			3842531610
Max. total weight of workpiece pallet	mG	kg	200 kg
Operating temperature 1)	T	°C	0 ... + 60
Material specification			Housing: PA 6 Safety catch: Brass Lug cam: PA 66
A-rated emission sound pressure level	LPA	dB(A)	<60
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	4 mm

1)	High-temperature stop gate on request

Permissible accumulation load

mG	vN
kg	m/min
200 140 100 70 50	6 9 12 15 18

Compressed air consumption of TS 2plus units