Attributes

Height	60mm
Length	150mm
Material information	Housing: PA 6,Safety catch: Brass,Stop cam: PA 66
Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min	35 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 15 m/min	25 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min	20 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min	50 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min	50 kg
Operating temperature [T] max	+60 °C
Pneumatic circuit diagram	1 Not included in the scope of delivery
Pneumatic straight connection [Ø]	4mm
Recommended accessories	2x sensor M8x1
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section,Position inquiry
Weight	0.4kg
Width	80mm
Workpiece pallet weight [mG]	50kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Slide stop, can be lowered pneumatically
• Reversible operation not permitted
• Detachable position sensing of the slide stop position using sensors
• Not suitable for ST 2...-H sections
• Can be combined with WT 2/E, WT 2, WT 2/F and WT 2/LS
• The slide stop is used in a transverse section that connects more than two longitudinal sections and that requires supplementary stops
• A lift transverse unit can feed in the workpiece pallet onto the longitudinal section when the slide stop is activated
• When depressurized, the pneumatically lowered slide stop is extended to the upper end position
• Mounted inside the tracks, directly on the conveyor section
• 1 - Slide stop, can be lowered pneumatically
• 2 - Reversible operation not permitted
• 3 - Detachable position sensing of the slide stop position using sensors
• 4 - Not suitable for ST 2...-H sections
• 5 - Can be combined with WT 2/E, WT 2, WT 2/F and WT 2/LS
• 6 - The slide stop is used in a transverse section that connects more than two longitudinal sections and that requires supplementary stops
• 7 - A lift transverse unit can feed in the workpiece pallet onto the longitudinal section when the slide stop is activated
• 8 - When depressurized, the pneumatically lowered slide stop is extended to the upper end position
• 9 - Mounted inside the tracks, directly on the conveyor section

VA 2/50 Slide Stop
Slide stop, can be lowered pneumatically
Reversible operation not permitted, , Slide stop, can be lowered pneumatically, Detachable position sensing of the slide stop position using sensors, Not suitable for ST 2... H sections

• 3D CAD
• Data Sheet

VA 2/50 Slide Stop

The slide stop is used in a transverse section that connects more than two longitudinal sections and that requires supplementary stops. A lift transverse unit can feed in the workpiece pallet onto the longitudinal section when the slide stop is activated. The pneumatically lowerable slide stop is extended to the upper end position when the system is depressurized. Mounted inside the tracks, directly on the conveyor section.

1)	Not included in the scope of delivery

No.			3842528808
Max. total weight of workpiece pallet	mG	kg	50
Max. operating temperature	T	°C	60
Material entry			Housing: PA 6 Safety catch: Brass Lug cam: PA 66
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	4

Compressed air consumption of TS 2plus units