Attributes

Delivery information	Fully assembled
ESD	yes
Gross weight	1.931kg
Height	65mm
Length	180mm
Material information	Housing: Aluminum, hard anodized,Stop cam: Steel, hardened
Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min	100 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 15 m/min	100 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min	100 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 24 m/min	55 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 30 m/min	35 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min	200 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min	140 kg
Min. workpiece pallet weight m	5 kg
Notice	High-temperature stop gate on request
Opening/shutting times	l = Hose length,1 Close,2 Open at 4 bar
Operating temperature [T] max	+5 ... +60 °C
Pneumatic circuit diagram	1 Not included in the scope of delivery
Pneumatic straight connection [Ø]	6mm
Recommended accessories	VE 2/RS Return Stop
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section
Weight	1.94kg
Width	120mm
Workpiece pallet weight [mG]	200kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Pneumatic stop gate
• Infinitely adjustable damping
• Optimum damping for workpiece pallet total weights between 50 kg and 200 kg
• Can be combined with WT 2 and WT 2/F
• When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped
• Stops one or more accumulating workpiece pallets at the defined stop surface
• Mounted inside the tracks, directly on the conveyor section
• Notice: Combination with WT 2/LS not possible
• 1 - Pneumatic stop gate
• 2 - Infinitely adjustable damping
• 3 - Optimum damping for workpiece pallet total weights between 50 kg and 200 kg
• 4 - Can be combined with WT 2 and WT 2/F
• 5 - When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped
• 6 - Stops one or more accumulating workpiece pallets at the defined stop surface
• 7 - Mounted inside the tracks, directly on the conveyor section
• 8 - Notice: Combination with WT 2/LS not possible

VE 2/D-200 Stop Gate
Dampened stopping of the first accumulating workpiece pallet
Can be combined with WT 2 and WT 2/F, Pneumatic stop gate, Infinitely adjustable damping, Optimum damping for workpiece pallet total weights between 50 kg and 200 kg

• 3D CAD
• Data Sheet

VE 2/RS Return Stop

VE 2/RS Return Stop

Spring-loaded safety catch Can be used on the left or right

Assembly instructions

CAD data

Condition of Delivery

Fully assembled

Scope of delivery

Incl. all fastening material to mount on ST 2/... conveyor section

Opening and shutting times

L = Hose length
1 Close
2 Open 4 bar

VE 2/D-200 Stop Gate

* Stroke

Dampened stopping of the first accumulating workpiece pallet. The stop gate stops one or more accumulating workpiece pallets at the defined stop surface of the workpiece pallet. When the pressure is released, the stop gate is closed by a spring and the workpiece pallet is stopped. Mounted inside the tracks, directly on the conveyor section.

Circuit diagram

1)	Not included in the scope of delivery

Permissible accumulation load

mG	vN
kg	m/min
200 140 100 100 100 55 35	6 9 12 15 18 24 30

No.			3842524895
Max. total weight of workpiece pallet	mG	kg	200 kg
Workpiece pallet minimum weight	m	kg	5 kg
Operating temperature 1)	T	°C	0 ... +60
Material specification			Housing: Aluminum, hard anodized Lug cam: Steel, hardened
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	6 mm

1)	High-temperature stop gate on request

Compressed air consumption of TS 2plus units