Attributes

ESD	yes
Height	160mm
Length	250mm
Mass [m]	5kg
Monitoring range, max	1230mm
Monitoring range, min	430mm
Notice	Max. total WT weight applies when infeeding from a transverse section into a main section; for area monitoring, only the max. system weight of 240 kg cannot be exceeded,Min. WT weight applies per rocker body
Recommended accessories	Additional MS rocker extension with second rocker and connecting strip for installation of a rocker positioned between the start and end of the conveyor section from a monitoring range of 400 mm.
Required accessories	Sensor M12 circular with rated switching distance S<sub>N</sub> = 4 mm at vertical installation,Sensor M12 circular with rated switching distance S<sub>N</sub> = 8 mm at horizontal installation
Scope of delivery	Incl. fastening material,Including DA 2/100 damper
Weight	0.78kg
Width	200mm
Workpiece pallet weight [mG]	100kg

• As a damped stop for workpiece pallets in the transverse conveyor
• For area monitoring
• For workpiece pallet recognition
• For permitted total weight of workpiece pallets 35 kg
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• Can be combined with WT 2, WT 2/F and WT 2/LS
• Suitable for use in an EPA
• 1 - As a damped stop for workpiece pallets in the transverse conveyor
• 2 - For area monitoring
• 3 - For workpiece pallet recognition
• 4 - For permitted total weight of workpiece pallets 35 kg
• 5 - Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• 6 - Can be combined with WT 2, WT 2/F and WT 2/LS
• 7 - Suitable for use in an EPA

WI 2/D Rocker
Suitable for use in an EPA, , Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/… H section with a profile width of 50 mm, For area monitoring, For workpiece pallet recognition, As a damped stop for workpiece pallets in t

• 3D CAD
• Data Sheet

Recommended accessories

Additional MS rocker extension with second rocker and connecting strip for installation of a rocker positioned between the start and end of the conveyor section from a monitoring range of 400 mm.

Scope of delivery

Incl. fastening material

Including DA 2/100 damper

WI 2/D Rocker

MS additional rocker extension

Rockers are used for the following areas:

For area monitoring As a stop for transverse conveying of workpiece pallets For workpiece pallet recognition

 

Depending on the desired function, WI/M, WI 2/… rockers should be fitted with one or two sensors.

No.			3842524448
Max. total weight of workpiece pallet 1)	mG	kg	100
ESD			yes
Mass 2)	m	kg	5
Monitoring range		mm	430,0 ... 1230,0

1)	Max. total WT weight applies when feeding from a transverse section into a main section; for area monitoring, only the max. system weight of 240 kg must not be exceeded
2)	Min. WT weight applies per rocker