Attributes

Delivery information	Fully assembled
Height	50mm
Length	100mm
Material information	Housing: PA 6,Stop cam: PA 66
Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min	70 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 15 m/min	50 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min	30 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min	140 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min	90 kg
Notice	High-temperature stop gate on request
Operating temperature [T] max	+5 ... +60 °C
Pneumatic straight connection [Ø]	4mm
Recommended accessories	VE 2/RS Return Stop,Switch bracket SH 2/...,Position sensor
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section,Pneumatic elements
Weight	0.38kg
Width	85mm
Workpiece pallet weight [mG]	140kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Pneumatic stop gate
• Used on sections with reversible operation
• Pressure must not be exerted on VE 2/S by pallets traveling in reverse
• Can be combined with WT 2/E, WT 2, WT 2/F and WT 2/LS
• Safe transition from both directions is possible by actively (pneumatically) opening the safety catch
• Stops one or more accumulating workpiece pallets at the defined stop surface
• The VE 2/S can only stop workpiece pallets coming from one direction
• When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped
• Two VE 2/S are needed to stop workpiece pallets coming from both directions of transport, since pressure must not be exerted on the stop gate by pallets traveling in reverse
• Mounted inside the tracks, directly on the conveyor section
• 1 - Pneumatic stop gate
• 2 - Used on sections with reversible operation
• 3 - Pressure must not be exerted on VE 2/S by pallets traveling in reverse
• 4 - Can be combined with WT 2/E, WT 2, WT 2/F and WT 2/LS
• 5 - Safe transition from both directions is possible by actively (pneumatically) opening the safety catch
• 6 - Stops one or more accumulating workpiece pallets at the defined stop surface
• 7 - The VE 2/S can only stop workpiece pallets coming from one direction
• 8 - When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped
• 9 - Two VE 2/S are needed to stop workpiece pallets coming from both directions of transport, since pressure must not be exerted on the stop gate by pallets traveling in reverse
• 10 - Mounted inside the tracks, directly on the conveyor section

VE 2/S Stop Gate
, Pneumatic stop gate, Used on sections with reversible operation, Pressure must not be exerted on VE 2/S by pallets traveling in reverse

• 3D CAD
• Data Sheet

Switch Bracket

Switch Bracket

Stop gate position sensor

Stop gate position sensor

For retrofitting on the VE 2, VE 2/M, VE 2/L and VE 2/S stop gates Upper and lower position sensing possible, only suitable for upper position sensing with VE 2/S

CAD data

VE 2/RS Return Stop

VE 2/RS Return Stop

Spring-loaded safety catch Can be used on the left or right

Assembly instructions

CAD data

Condition of Delivery

Fully assembled

Scope of delivery

Incl. all fastening material to mount on ST 2/... conveyor section

Pneumatic elements

Opening and shutting times

L = Hose length
1 Close
2 Open 4 bar

VE 2/S Stop Gate

Note: Safe transition from both directions is possible by actively (pneumatically) opening the safety catch.

Stops one or more accumulating workpiece pallets at the defined stop surface of the workpiece pallet. The VE 2/S can only stop workpiece pallets coming from one direction. When the pressure is released, the stop gate is closed by a spring and the workpiece pallet is stopped. Two VE 2/S stop gates are needed to stop pallets coming from both directions, since pressure must not be exerted on the stop gate by pallets traveling in reverse. Mounted inside the tracks, directly on the conveyor section.

Circuit diagram

1 not included in the scope of delivery

No.			3842515844
Max. total weight of workpiece pallet	mG	kg	140 kg
Operating temperature 1)	T	°C	0 ... +60
Material specification			Housing: PA 6 Lug cam: PA 66
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	4 mm

1)	High-temperature stop gate on request

Permissible accumulation load

mG	vN
kg	m/min
140 90 70 50 30	6 9 12 15 18