Attributes

ESD	yes
Gross weight	1.602kg
Height	80mm
Length	210mm
Material information	Housing: Aluminum,Stop: Aluminum
Maximum permissible mass workpiece pallet mG at nominal speed vN 12 m/min	35 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 15 m/min	25 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 18 m/min	20 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 6 m/min	50 kg
Maximum permissible mass workpiece pallet mG at nominal speed vN 9 m/min	50 kg
Notice	High-temperature stop gate on request
Operating temperature [T] max	+60 °C
Pneumatic circuit diagram	1 Not included in the scope of delivery
Pneumatic straight connection [Ø]	6mm
Recommended accessories	Sensor M12x1
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section,Bracket pivoting screw fitting
Weight	1.61kg
Width	140mm
Workpiece pallet weight [mG]	50kg
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar

• Slide stop, can be raised pneumatically
• Integrated switch bracket
• Reversible operation possible
• Not suitable for ST 2...-H sections
• Sensing of the slide stop upper position via sensors
• Can be combined with WT 2 and WT 2/F
• The slide stop is used in a transverse section that connects more than two longitudinal sections and that requires supplementary stops
• A lift transverse unit can feed in the workpiece pallet onto the longitudinal section when the slide stop is activated
• When depressurized, the pneumatically extended slide stop is lowered to the lower end position
• Mounted inside the tracks, directly on the conveyor section
• 1 - Slide stop, can be raised pneumatically
• 2 - Integrated switch bracket
• 3 - Reversible operation possible
• 4 - Not suitable for ST 2...-H sections
• 5 - Sensing of the slide stop upper position via sensors
• 6 - Can be combined with WT 2 and WT 2/F
• 7 - The slide stop is used in a transverse section that connects more than two longitudinal sections and that requires supplementary stops
• 8 - A lift transverse unit can feed in the workpiece pallet onto the longitudinal section when the slide stop is activated
• 9 - When depressurized, the pneumatically extended slide stop is lowered to the lower end position
• 10 - Mounted inside the tracks, directly on the conveyor section

VA 2/50 slide stop - reversible
Slide stop, can be extended pneumatically
Reversible operation possible, Can be combined with WT 2 and WT 2/F, Not suitable for ST 2... H sections, Slide stop, can be raised pneumatically, Integrated switch bracket, Sensing of the slide stop upper position via sensors

• 3D CAD
• Data Sheet

VA 2/50 slide stop - reversible

1)	Conveying level
2)	Limit stop activated

The slide stop is used in a transverse section that connects more than two longitudinal sections and that requires supplementary stops. A lift transverse unit can feed in the workpiece pallet onto the longitudinal section when the slide stop is activated. The pneumatically extensible slide stop is extended to the lower end position when the system is depressurized. The slide stop upper position can be detected using sensors Mounted inside the tracks, directly on the conveyor section.

1)	Not included in the scope of delivery

No.			3842191721
Max. total weight of workpiece pallet	mG	kg	50
Max. operating temperature 1)	T	°C	60
Material entry			Housing: aluminum Stop: Aluminum
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	6

1)	High-temperature stop gate on request

Compressed air consumption of TS 2plus units