HANDHELD NUTRUNNER ESV073-G 14-73NM

Maintenance-free for 1 million full load cycles, Max. output drive speed: 1700 rpm, Suitable for safety-critical tightening jobsin accordance with VDI/VDE 2862, With integrated measurement transducer, Working range 1-146 Nm, Extended application options i / Material Number:0608841247

HANDHELD NUTRUNNER ESV073-G 14-73NM

Material #0608841247

Request Quote

Attributes

Weight 2.4kg
Code ESV073-G
Productgroup ID 3
Working range (max.) 73Nm
Working range (min) 14Nm
Order number 0608841247
Installation length 406mm
Maximum drive speed (1/min) 900min⁻¹
Tool mount Standard machine without output drive and with zero-play spur gearing for free connection of flat wrenches and special output drives
Weight 3.150kg
  • Working range 1-146 Nm
  • Max. output drive speed: 1700 rpm
  • Extended application options in combination with handling devices
  • Can be used as a tightening spindle with output drive adapters
  • Fully suitable for robot use
  • Zero-play spur gearing for free connection of crowfoot wrenches and special output drives
  • With integrated measurement transducer
  • Maintenance-free for 1 million full load cycles
  • Suitable for safety-critical tightening jobsin accordance with VDI/VDE 2862
HANDHELD NUTRUNNER ESV073-G 14-73NM

Maintenance free for 1 million full load cycles, Max. output drive speed: 1700 rpm, Suitable for safety critical tightening jobsin accordance with VDI/VDE 2862, With integrated measurement transducer, Working range 1 146 Nm, Extended application options i

Code

Order no.

LS-ESG

1x license

0608830307

Angle compensation functionality for ErgoSpin nutrunners

 

All new ErgoSpin handheld nutrunners now come with built in motion sensors. Thanks to these sensors, it is possible to use the new true angle compensation function. The use of this function requires the purchase of a license stick.

 

In the automotive assembly we see an increase of tightening applications using angle controlled processes. The use of angle controlled tightening processes provide the advantage of reducing the impact of many friction factors on the clamp force. In applications involving hand tools the movement of the tool by the worker (e.g. torque reaction) is influencing the angle value at the tightening joint, thereby influencing the results for the angle values with angle as a target function in the parameter settings. This movement of the tool has a negative influence on the clamp force result on the joint.

 

The new ErgoSpin hand tools from Rexroth utilize multi axis sensors from the Bosch Sensortec GmbH, which continuously measure the movement of the tool by the worker. With the help of this measurement, the influence of the tool movement on the angle result can be then be compensated. The installation or the use of additional supports structures or handles on hand tools can be eliminated in many cases.

 

The angle compensation function is available in combination with the Rexroth Tightening System 350 version V2.500 onwards and requires the hardware version 02.xx.xx or higher in the controller. To check the hardware version of your controller go online via the BS350 → System Test → Tightening Channel Info → CPU card rev. This CPU was integrated into the controllers in the middle of 2012. Activating the angle compensation function requires a license, which is available as a license stick. Each license stick contains exactly one license for one tightening channel. The license comes with a one-time fee and is paid for by the purchase of the license stick. The stick works with all new ErgoSpin models (as indicated by the part numbers 0 608 841 2xx). The license stick muss be plugged into the corresponding control unit for the function to be executed.

 

Free demo period

The angle compensation function can be tested for a maximum period of 30 days without licensing. Activation is only possible once for each channel on each controller.

 

Free replacement period

In the case a licensing stick should malfunction (e.g. cannot be read), a period of 10 days is available to obtain a replacement stick, without loss of functionality.

Work area

Max. output speed

Tool mount

Weight

Installation length

Code

Order no.

1 … 5 Nm 1090 rpm Standard machine without output drive and with zero-play spur gearing for free connection of crowfoot wrenches and special output drives 1.1 kg 333 mm ESV005-G 0608841243
2.4 … 12 Nm ESV012-G 0608841035
5 … 25 Nm 1700 rpm 1.4 kg 365 mm ESV025-G 0608841245
10 … 50 Nm 830 rpm 1.5 kg 375 mm ESV050-G 0608841246
14 … 73 Nm 900 rpm 2.4 kg 406 mm ESV073-G 0608841247
29 … 146 Nm 420 rpm 2.8 kg 430 mm ESV146-G 0608841248

Request Quote

How to Find Us

If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.

Headquarters

1505 W. Hamlin Road
Rochester Hills, MI 48309

Phone
248-584-5600
Fax
248-584-1117

West Michigan Office

Phone
269-381-1285
Fax
269-381-1379

Have questions?