HYDRAULIC GEAR PUMP AZPGF-22-040/004RCB2020MB
| Rear cover | Standard |
| Maximum rotational speed | 2800rpm |
| Productgroup ID | 7,21,22,23,24,25 |
| Size (geometric displacement) | 4cm³/rev |
| Line connection PU2 | Square flange DIN 3901/3902 |
| Sealing material | NBR |
| Maximum intermittent pressure pump unit 2 | 280bar |
| Version | corrosion-resistant, pinned |
| Noise level | Standard noise level |
| External gear unit | External gear unit |
| Drive shaft | Conical 1:5 |
| Housing material | Aluminum |
| Size (geometric displacement) PU2 | 4cm³/rev |
| Maximum intermittent pressure pump unit 1 | 280bar |
| Line connection | Rectangular flange for fitting ISO8434-1 |
| Series | Model G (22.5 ... 56 cm³/rev) |
| Front cover | Rectangular flange Ø 105 mm |
| Direction of rotation | clockwise rotation |
| Unit version | Bearing diameter Ø 26mm |
| External gear unit function | Pump |
| Series PU2 | Model F (4 ... 28 cm³/rev) |
| Weight | 13.000kg |
| Max. flow PU2 | 11.2l/min - delete |
| Max. flow | 11.2l/min - delete |
- Port connections: flanged or threaded
- Long service life
- Drive shafts according to ISO or SAE and customer specific solutions
- Slide bearings for high loads
- Consistent high quality based on large-volume production
4 cm³/rev + 4 cm³/rev , Rectangular flange Ø 105 mm, clockwise rotation, Conical 1:5, Rectangular flange for fitting ISO8434-1, Square flange DIN 3901/3902, Standard
The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To avoid unnecessarily high heat losses, units with high efficiencies are sought after. These are realized by means of pressure-dependent gap sealing and high-precision manufacturing technology.
Consistent high quality based on large volume production, Drive shafts according to ISO or SAE and customer specific solutions, Long service life, Slide bearings for high loads, Port connections: flanged or threaded
The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To avoid unnecessarily high heat losses, units with high efficiencies are sought after. These are realized by means of pressure-dependent gap sealing and high-precision manufacturing technology.
Consistent high quality based on large volume production, Drive shafts according to ISO or SAE and customer specific solutions, Long service life, Slide bearings for high loads, Port connections: flanged or threaded
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.