HYDRAULIC GEAR PUMP AZPFF-21-022/016LFP2020PB
| Rear cover | Standard (cast iron) |
| Maximum rotational speed | 3000rpm |
| Productgroup ID | 7,21,22,23,24,25 |
| Size (geometric displacement) | 22.5cm³/rev |
| Line connection PU2 | Square flange to fitting ISO 8434-1 |
| Sealing material | FKM |
| Maximum intermittent pressure pump unit 2 | 210bar |
| Version | phosphatized, pinned |
| Special version | Deviations from catalogue standards, see drawing |
| Noise level | Standard noise level |
| External gear unit | External Gear Units |
| Application | Deutz tractor |
| Customer part number | 0510765337 |
| Drive shaft | Spline shaft DIN 5482 B17x14 |
| Housing material | Aluminum |
| Size (geometric displacement) PU2 | 16cm³/rev |
| Maximum intermittent pressure pump unit 1 | 210bar |
| Line connection | Square flange to fitting ISO 8434-1 |
| Series | 4 ... 28 cm³/rev |
| Front cover | 2-bolt mounting Dia. 50 mm (K H D) |
| Direction of rotation | Counter clockwise rotation |
| Unit version | D 20 |
| External gear unit function | Pump |
| Series PU2 | 4 ... 28 cm³/rev |
| Weight | 5.712kg |
| Max. flow PU2 | 48.0l/min - delete |
| Max. flow | 67.5l/min - delete |
- Drive shafts according to ISO or SAE and customer specific solutions
- Port connections: flanged or threaded
- Consistent high quality based on large-volume production
- Slide bearings for high loads
- Long service life
22.5 cm³/rev + 16 cm³/rev, Counter clockwise rotation, Spline shaft DIN 5482 B17x14, 2-bolt mounting Dia. 50 mm (K H D), Square flange to fitting ISO 8434-1, Square flange to fitting ISO 8434-1
The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To avoid unnecessarily high heat losses, units with high efficiencies are sought after. These are realized by means of pressure-dependent gap sealing and high-precision manufacturing technology.
Consistent high quality based on large volume production, Drive shafts according to ISO or SAE and customer specific solutions, Long service life, Slide bearings for high loads, Port connections: flanged or threaded
The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To avoid unnecessarily high heat losses, units with high efficiencies are sought after. These are realized by means of pressure-dependent gap sealing and high-precision manufacturing technology.
Consistent high quality based on large volume production, Drive shafts according to ISO or SAE and customer specific solutions, Long service life, Slide bearings for high loads, Port connections: flanged or threaded
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.